12.48
SafeNet/400 Reference Guide
© Copyright 2008 MP Associates of Westchester, Inc.
V8.50 - May 2008
TELNET Device Initialization
TELNET Device Termination
Description: TELNET Device Initialization - *TELNETON
TELNET Device Termination - *TELNETOFF
The TELNET servers provide for security when using TCP/IP and TELNET clients. This point
allows the restriction by IP address and password type. Auto-signon can also be configured.
TELNET Device Termination allows for session logging and device management upon session
termination. *TELNETOFF is dependent upon the setting of *TELNETON.
Where used: Any TN5250 (TELNET client)
MS Windows
iSeries Access for Windows
Server Identifier: *TELNETON
*TELNETOFF
Format Name: INIT0100
TERM0100
Levels Supported: Basic (Level 1,2)
Intermediate (Level 3)
Limitations: See Chapter 3 in this guide, ‘TELNET, TCP/IP Address Controls’
Recommended
Setting: Level 3, Log All
Notes:
1. Level 3 requires correct IP addressing in control file (WRKTCPIPA *TELNET)
2. You can limit FTP connections from specific IP Addresses. See commands:
CHGFTPSET IPCTL(*YES) and WRKTCPIPA *FTPSERVER
You can also review ‘Setting up TCP/IP Address Controls’ in Chapter 3 of this guide.