Entering Long Path Names

The default SafeNet/400 setting is to use long path names.

If you choose to not use long path name support, you must first change the SafeNet/400 default setting. Use the CHGSPCSET command to set the PATHL parameter to *SHORT.

Follow these steps to authorize the user to the paths.

1.If you used F9 from the previous screen, continue with Step 4.

2.From the SafeNet/400 Main Menu, select Option 7 - Work with User to Long Path Names or use WRKUSRPTH command

The Work with User to Path Names, Enter User ID screen is displayed.

3.Type the user profile or *PUBLIC then ENTER.

If you would like a list of all user profiles on the system, press F4 or type *ALL. To see a list of users already defined within SafeNet/400 type *ALLDFN.

The Maintain Path Names screen appears.

If you would like to see the list of all users who have been defined within SafeNet/400, press F2.

SafeNet/400 Reference Guide

 

Copyright 2008 MP Associates of Westchester, Inc.

1.19

V8.50 - May 2008

 

Page 23
Image 23
IBM Safenet/400 manual Entering Long Path Names, Maintain Path Names screen appears