IBM Safenet/400 manual Setting up for Anonymous FTP, Example, Locate the FTP Logon Server point

Setting up for ANONYMOUS FTP

Example

1.Create a user profile on the System i5 called ANONYMOUS, with password *NONE and user class *USER, and set the Current Library.

2.From the Special Jobs Menu, select Option 3 - Change Special FTP Server Settings or use CHGFTPSET command along with F4

3.Set the parameters as follows:

•If you want to allow OS/400 users other than ANONYMOUS to log in through FTP server set parameter RLOGON to*YES

•Enter ALOGON(*YES) to allow ANONYMOUS

•Enter the library name to which the user is restricted in parameter ALIBR

•Enter the type of password you want the user to enter - E-mail or Guest, or both

•Enter the OS/400 user profile in parameter AUSRPRF that was created in Step 1 above (ANONYMOUS)

•Enter password for the ANONYMOUS user profile in APWD parameter

4.Press ENTER

5.Return to the SafeNet/400 Main Menu

6.Select Option 1 - Work with Server Security Settings or use WRKSRV command

7.Locate the FTP Logon Server point

8.Change the FTP Logon Server to Level 3

9.Change the FTP Server Validation point to Level 4. If you want to allow for anonymous logons, you MUST set this to Level 4

10.From the SafeNet/400 Main Menu, select Option 2 -Work with User to Server Security or use WRKUSRSRV command

11.Grant the ANONYMOUS user profile authority to the FTP Logon and FTP Server Request Validation server points.

12.From the SafeNet/400 Main Menu, select Option 3 - Work with User to Object Level Security or use WRKUSROBJ command

13.Grant the ANONYMOUS user authority to the library entered in step 3 above (Current Library), and specifically to any objects within the library. Or, enter *ALL for all object and then assign the required data rights.

SafeNet/400 Reference Guide

♥ Copyright 2008 MP Associates of Westchester, Inc.

V8.50 - May 2008

4.5