Controlling TELNET Access by IP Address
1.Set the TELNET server to Level 3 using the WRKSRV command.
2.From the SafeNet/400 Main Menu, select Option 7 – Work with TCP/IP Address Security or use the WRKTCPIPA command and enter *TELNET as the server to control
3.Enter the IP address in dotted decimal format (i.e., 10.2.2.2) Use wild card options if desired (10.2.2.x)
4.Enter A or R to accept or reject the request
Restricting Access to Specific Device Names
1.Set the TELNET server to Level 3 using the WRKSRV command
2.Use the WRKTCPIPA command to enter the correct IP address, then enter the device name to use for this IP address.
You may also use a generic device name by putting an * at the end of the name. If you use a generic name, up to 99 will be used.
For example:
An entry of AP* would allow devices to be used as AP01 through AP99. The login process through TELNET will select the next available device name.
| SafeNet/400 Reference Guide | |
3.2 | ♥ Copyright 2008 MP Associates of Westchester, Inc. | |
V8.50 - May 2008 | ||
|
