Batch Transaction Test Review/Report – Security Report by User

You can use this batch report to test all the historical transactions through current and future control file settings.

With this report you can make changes to control files, then re-run all the historical transactions back through a security check process to determine if further security set up is required.

If you want to see the same servers each time you run this security report, you can customize it by using Special Jobs Menu Option 1 - Select Default Servers for Security Report. This option lets you select the specific servers you are interested in, then makes them the default each time you run the report.

Run this report from Menu SN4, the Network Transaction Analysis Reports Menu Option 1 - Print Security Report by User or use the PRTSECRPT command.

Use F9 to display all parameters

On the Print Security Report screen fill in the following:

1.Decide if you wish to print all transactions or only those that were rejected. Enter Y for only rejections (the default) or N to print all transactions

Printing only rejections will reduce the size of the output report

 

SafeNet/400 Reference Guide

7.6

Copyright 2008 MP Associates of Westchester, Inc.

V8.50 - May 2008

 

Page 76
Image 76
IBM Safenet/400 manual Batch Transaction Test Review/Report Security Report by User