IBM Safenet/400 manual Work User to CL Commands, Enter User ID screen is displayed

Entering User Authorities to CL Commands

Next, if you plan on setting the FTP, DDM or Remote Command Servers to Level 4, you must authorize users to the CL commands they may need.

1.If you used F9 from the previous screen, continue with Step 4.

2.From the SafeNet/400 Main Menu, select Option 6 - Work with User to CL Command Security or use WRKUSRCMD command

The Work User to CL Commands, Enter User ID screen is displayed.

3.Type the user profile or *PUBLIC then ENTER.

If you would like a list of all user profiles on the system, press F4 or type *ALL. To see a list of users already defined within SafeNet/400 type *ALLDFN.

The Maintain Authorized CL Commands screen appears.

4.Type each CL command that this user is permitted to use.

If you want the user to have access to all CL commands, type *ALL in the first available space.

SafeNet/400 Reference Guide
♥ Copyright 2008 MP Associates of Westchester, Inc.	1.17
V8.50 - May 2008