12.42

Remote Command and Distributed Program Call Server

Description: Remote Command/Program Call - 100

The remote command and distributed program call server is provided to allow client users and applications to issue System i5 CL commands and call programs.

Where used:	iSeries Access for Windows
Server Identifier:	*RMTSRV
Format Name:	CZRC0100
Levels Supported:	Basic	(Levels 1,2)
	Intermediate	(Level 3)
	Advanced	(Level 4)
	And special global control setting
Limitations:	Cannot check Library/Object security on imbedded command strings
Recommended
Setting:	Level 4, Log All

Notes:

1.For X-1002 Remote Command Call, the same rules apply here as for *DDM commands. You must use the Special Jobs Menu to allow or reject remote commands entering via this server. In addition, see Note 3 below.

One setting controls both *RMTSRV X-1002 and *DDM command servers.

2.Used by Operations Navigator for system object access.

Each GUI request from system object access triggers a program call. Most are in QUSRSYS or QGY libraries. By allowing QGY/*ALL and QUSRSYS/*ALL Read Data Rights, you let users access GUI interfaces.

3.At Level 4 you must authorize each user to the CL commands they may issue through this server.

		SafeNet/400 Reference Guide
	12.42	♥ Copyright 2008 MP Associates of Westchester, Inc.
	12.42	V8.50 - May 2008
		V8.50 - May 2008

IBM Safenet/400 manual 12.42

Models: Safenet/400

Where used:

Server Identifier:

Format Name:

Levels Supported:

Limitations:

♥ Copyright 2008 MP Associates of Westchester, Inc.