SafeNet Administrator

You can set up a SafeNet/400 Administrator, or ‘Super Admin’ from the SafeNet/400 Special Jobs Menu or by using the WRKSNADM command. This can also be found on the Special Jobs Menu, Option 5 – Maintain SafeNet Administrators.

The WRKSNADM command can be executed by a user with *SECADM or *SECOFR authority.

A user profile must be set up as a SafeNet/400 ‘Super Admin’ to perform the following:

Activate or deactivate SafeNet/400

Change/copy/remove the IBM-supplied Q profiles settings in SafeNet/400 Use the WRKSRV, CHGSPCSET, CHGFTPSET commands

A regular SafeNet/400 user or administrator does not have authority to the above functions.

Unless specifically changed, QSECOFR is ALWAYS a SafeNet/400 Super Admin. User profile SAFENET is a Super Admin; this status can be changed or removed to suit your purposes.

SafeNet/400 Reference Guide

 

Copyright 2008 MP Associates of Westchester, Inc.

1.3

V8.50 - May 2008

 

Page 7
Image 7
IBM Safenet/400 manual SafeNet Administrator