STACK menu settings
3.7 Important information for Intelligent Stack
This section provides important information related to setting up the Main and Sub projectors. It does not contain explanations on menu operation. Read all information carefully.
●To use Intelligent Stack, one projector must be set to Main and the other set to Sub.
●All buttons are disabled, except the STANDBY/ON button on the Sub projector's control panel. Operate the projectors with the control panel of the Main projector or the remote control.
●Pressing the STANDBY/ON button of the Sub projector does not allow you to turn off the Sub projector by itself. The Main and Sub projectors turn off when the button is pressed for more than 3 seconds. Pressing the button again will not turn on the Main or Sub projector.
●The remote control should be pointed at the Main projector because the Main projector is capable of receiving remote control signals and the Sub projector is not.
●<Only for IN5142, IN5144, IN5144a and IN5145>
Each Status Monitor can also be operated individually from the respective control panel of the Main and Sub projectors. Only the monitor on the projector that has been turned on can be operated with the remote control.
●If a wired remote control is used, connect the cable to the Main projector instead of the Sub projector.
●For simple PC mouse & keyboard functions, connect both the Main and Sub projectors to your computer with USB cables. (Operating Guide → Using as a simple PC mouse & keyboard)
●The AUTO SEARCH function is disabled when the projector is used in Intelligent Stack.
●The Sub projector cannot be turned on using network communication and Web Control to the Sub projector. The Sub projector can only be controlled through the Main projector.
●The Web Remote Control function of the Sub projector is disabled. (Network Guide → 3.1.11 Remote Control)
●If you try to turn on the projectors using the POWER ON & DISPLAY ON feature of the MESSENGER function, the projectors will exit Intelligent Stack and display the specified message. To start Intelligent Stack again,
(continued on next page)
20
