Using Passwords
If only the supervisor password is set, you:
•Must enter the supervisor password to enter BIOS Setup.
•Must enter the supervisor password to boot the server if Password on Boot is enabled in the BIOS Setup.
•Must enter the supervisor password to exit secure mode.
If both passwords are set, you:
•May enter the user password to enter BIOS Setup. However, you will not be able to change many of the options.
•Must enter the supervisor password if you want to enter BIOS Setup and have access to all of the options.
•May enter either password to boot the server if Password on Boot is enabled in the BIOS Setup.
•May enter either password to exit secure mode.
Password Clear Jumper
If the user or supervisor password(s) is(are) lost or forgotten, moving the password clear jumper into the “clear” position clears both passwords. The password clear jumper must be restored to its original position before a new password(s) can be set. The password clear jumper is located on jumper block J106 pins
Description | 19 |
