Installing Memory
The server board supports only DDR 200/266 compliant DIMMs. Install from 256 MB to 4 GB of memory, using up to four DIMMs.
DIMMs must be installed in pairs. The furthest DIMM pair from the MCH must be populated first.
No DIMM mixing is allowed within a bank. Between banks only the DIMM size may be different. All DIMMs must be the same speed and architecture. For a list of supported memory, visit the Intel Support Web site:
http://support.intel.com/support/motherboards/server/SE7500CW2
Aux.
Pwr DIMM 1A
DIMM 1B
DIMM 2A
DIMM 2B
OM14194
Figure 10. Installing Memory
Server Board Installation | 55 |
