Intel SE7500CW2 manual Description, Server Board Features

1 Description

Server Board Features

The Intel® Server Board SE7500CW2 offers a “flat” design, with the processors and memory subsystems residing on the board. The server board supports dual-processor operation with Intel® Xeon™ processors and the Intel® E7500 chipset. The board contains embedded devices for video, network, and IDE and provides basic monitoring hardware and interrupt control for dual processors and PC/AT†-compatible operation.

Table 1. Server Board Features

Feature

Processor

Chipset

Memory

Video

PCI bus

Hard Disk Drive (HDD)

Network

Description

Dual Intel Xeon processors for the Intel socket 604 that use the Flip Chip Pin Grid Array (FC-PGA) package

Intel E7500 chipset:

•Supports 400 MHz Front Side Bus (FSB)

•Memory Controller Hub (MCH) (North Bridge)

•I/O Controller Hub 3 (ICH3) (South Bridge)

•P64H2 64-bit I/O hub

•DDR 200/266 compliant ECC DIMMs providing up to 4 GB of memory

•DIMM Sockets: Four 72-bit, 184-pin, gold contact

•Supported DIMM sizes: 128, 256, 512 MB, and 1 GB

•Integrated onboard ATI Rage† XL 64-bit SVGA video controller

•8 MB SDRAM video memory

•SVGA video port

Five PCI expansion slots for add-in boards:

•One 64-bit, PCI-X 133 MHz expansion slot

•Two 64-bit, PCI-X 100 MHz expansion slots

•Two 32-bit, 33 MHz, PCI expansion slots

Two IDE connectors supporting up to four ATA-100 compatible devices:

•Two ATA 100 connectors controlled by the ICH3

•Two ATA 100 connectors controlled by Promise† 20267 ATA RAID controller

Integrated on-board Intel® EtherExpress™ PRO100+ 10/100 megabit PCI Ethernet controller (Intel® 82550PM) with two RJ-45 Ethernet ports

continued

7