Intel SE7500CW2 manual Attaching the Processor, Applying Thermal Grease

Attaching the Processor

✏NOTE

This server board has “zero-insertion-force” sockets. If the processor does not drop easily into the socket holes, make sure the lever is in the full upright position and the processor is oriented properly.

1. Lift the socket lever on the processor.

A

B

OM14473

Figure 12. Opening Socket Lever and Attaching Processor

2.Align the Alignment Triangle Mark (Figure 12, A) on the processor with the Alignment Triangle Cutout on the socket (Figure 12, B).

3.Insert the processor in the socket and close the socket lever.

Applying Thermal Grease

Apply thermal grease to the processor as shown in Figure 13.

OM14472

Figure 13. Applying Thermal Grease

Server Board Installation 57