Intel STL2 manual Basic Input Output System BIOS, 4-29, Jumpers and Connectors, 5-61

Table of ContentsSTL2 Server Board TPS

3.5	Wake On LAN Function	3-28
4. Basic Input Output System (BIOS)		4-29
4.1	BIOS Overview	4-29
4.1.1 System BIOS		4-30
4.1.2 Flash Update Utility		4-30
4.2	Setup Utility	4-31
4.2.1 Configuration Utilities Overview		4-31
4.2.2 Setup Utility Operation		4-31
4.3	CMOS Memory Definition	4-42
4.4	CMOS Default Override	4-43
4.5	Flash Update Utility	4-43
4.5.1 Loading the System BIOS		4-43
4.5.2 OEM Customization		4-44
4.5.3 Language Area		4-47
4.5.4 Recovery Mode		4-47
4.6	Error Messages and Error Codes	4-48
4.6.1 POST Codes		4-48
4.6.2 POST Error Codes and Messages		4-52
4.7	Identifying BIOS and BMC Revision Levels	4-55
4.7.1 BIOS Revision Level Identification		4-55
4.7.2 BMC Revision Level Identification		4-55
4.8	Adaptec SCSI Utility	4-56
4.8.1 Running the SCSI Utility		4-56
4.8.2 Adaptec SCSI Utility Configuration Settings		4-56
4.8.3 Exiting Adaptec SCSI Utility		4-58
5. Jumpers and Connectors		5-61
5.1	Jumper Blocks	5-63
5.1.1 Setting CMOS/Password Clear Jumper Block 1J15		5-63
5.1.2 Setting Configuration Jumper Block 1L4		5-66
5.1.3 Setting Configuration Jumper Block 6A		5-67
5.2	Connectors	5-67
5.2.1 Main ATX Power Connector (P33)		5-68
5.2.2 Auxilary ATX Power Connector (P34)		5-68
5.2.3 I2C Power Connector (P37)		5-68
5.2.4 System Fan Connectors (P29, P27, P11)		5-69
5.2.5 Processor Connectors (P12, P36)		5-69

iv