Intel STL2 manual 4.3CMOS Memory Definition, 4.2.2.9Exit Menu Selections

Basic Input Output System (BIOS)		STL2 Server Board TPS
3	Hard Drive	Attempts to boot from a hard drive device.
4	Intel UNDI, PXE-2.0	Attempts to boot from a PXE server.

Table 4-18. Hard Drive Selections

Boot Priority	Device	Description	User Setting
1	AIC-7899,CH B ID 11	Select the order in which each drive is attempted to be
		used as the boot device.
2	AIC-7899, CH A, ID 91
3	AIC-7899, CH B, ID 41
4	Bootable Add-in Cards
Note:

1.These selections will change depending on the system configuration

Table 4-19. Removable Devices Selections

Boot	Device	Description	User Setting
Priority
1	Legacy Floppy Drives	Select the order in which each removable device is
		attempted to be used as the boot device.1
Note:

1.These selections will change depending on the system configuration

4.2.2.9Exit Menu Selections

The following menu options are available on the Exit menu. Use the up and down arrow keys to select an option, then press the Enter key to execute the option.

	Table 4-20. Exit Menu Selections
Option	Description
Exit Saving Changes	Exit after writing all modified Setup item values to NVRAM.
Exit Discarding Changes	Exit leaving NVRAM unmodified. User is prompted if any of the setup fields were
	modified.
Load Setup Defaults	Load default values for all SETUP items.
Discard Changes	Read previous values of all Setup items from NVRAM.
Save Changes	Write all Setup item values to NVRAM.

4.3CMOS Memory Definition

Only the BIOS needs to know the CMOS map. The CMOS map is not defined in the BIOS EPS. The CMOS map is available in the NVRAM.LST file generated for every BIOS release. The CMOS map is subject to change without notice.

4-42