Intel STL2 manual 4.Processor Settings Submenu Selections, Revision, 4-35

STL2 Server Board TPSBasic Input Output System (BIOS)

Table 4-3. Primary Master and Slave Adapters Submenu Selections

	Choices or Display
Feature	Only	Description	User Setting
Type	Auto	Select the type of device that is attached to the
	None	IDE channel
	CD-ROM	If User is selected, the user will need to enter the
	ATAPI Removable
		parameters of the IDE device (cylinders, heads
	IDE Removable
		and sectors).
	Other ATAPI
	User
Mult-Sector Transfers	Disable	Specifies the number of sectors that are
	2 Sectors	transferred per block during multiple sector
	4 Sectors	transfers.
	8 Sectors
	16 Sectors
LBA Mode Control	Disabled	Enable/Disable Logical Block Addressing instead
	Enabled	of cylinder, head, sector addressing.
32 Bit I/O	Disabled	Enable/Disable 32Bit IDE data transfers
	Enabled
Transfer Mode	Standard	Select the method of moving data to and from
	Fast PIO 1	the hard drive. (If Type: Auto is select, optimum
	Fast PIO 2	transfer mode will be selected)
	Fast PIO 3
	Fast PIO 4
	FPIO 3/ DMA 1
	FPIO 4 / DMA 2
Ultra DMA Mode	Disabled	Enable/Disable Ultra DMA mode (If Type: Auto is
	Enabled	select, optimum transfer mode will be selected)

Table 4-4. Processor Settings Submenu Selections

	Choices or Display
Feature	Only	Description	User Setting
Processor Speed	XXX	(Display Only). Indicates the processor
		speed.
Processor 1 Type	XXX	(Display Only). Indicates the CPUID of the
		installed processor.
Cache Ram	XXXKB	(Display Only). Indicates the cache RAM
		size.
Processor 2 Type	XXX	(Display Only). Indicates the CPUID of the
		installed processor.
Cache Ram	XXXKB	(Display Only). Indicates the cache RAM
		size.
Processor #1 Status	Normal1	(Display Only)
Processor #2 Status	Normal1	(Display Only)
Clear Processor Errors	Press Enter	Clears the processor error information.
Processor Error Pause	Enabled	If enabled, the POST operation pauses if a
	Disabled	processor error occurs.
Processor Serial Number	Disabled	Disables/Enables Processor Serial Number.
	Enabled
Note:

1.Possible Values: Normal, None, or Error.

Revision 1.0 4-35