Intel STL2 manual 3-26, Platform Security

	Server Management				STL2 Server Board TPS
Sensor Type		Sensor Type	Sensor-Specific	Event	Remarks
		Code	Offset
Platform Security		06h	00h	Secured Mode Violation	Power/sleep switch has been
Violation Attempt				Attempt	activated while in Secure Mode
			03h	Pre-boot Password Violation	Bad Password at PXE Boot
				(network boot Password)
Processor		07h	00h	IERR	CPU IERR has occurred
			01h	Thermal Trip	CPU Thermal Trip has occurred
			02h	FRB1/BIST Failure	BIST Error has occurred
			04h	FRB3/Processor	FRB3 Timeout has been detected
				Startup/Initialization failure
				(CPU didn’t start)
			08h	Processor disabled	A processor has been Disabled
Memory		0Ch	00h	Correctable ECC	ECC 1-bit error occurred
			01h	Uncorrectable ECC	ECC 2-bit error occurred
POST Memory Resize		0Eh		POST Memory Resize	Displays the total amount of memory
					after memory failure
POST Error		0Fh		POST Error	POST Error occurred
Event Logging		10h	00h	Correctable Memory Error	Displays ECC single bit error
Disabled				Logging Disabled	monitoring disabled
			01h	Event ‘Type’ Logging Disabled	Monitoring of a certain event type
					has been disabled
			02h	Log Area Reset/Cleared	Displays the SEL area cleared.
			03h	All Event Logging Disabled	Monitor for the entire BMC has been
					disabled.
System Event		12h	00h	System Reconfigured	Setup change has occurred
			01h	OEM System Boot Event (Hard	Cold reset has been issued
				Reset)
Critical Interrupt		13h	00h	Front Panel NMI Dump Switch	Dump switch has been activated
			02h	I/O channel check NMI	ISA I/O Check has occurred.
			04h	PCI SERR	PCI SERR occurred
			05h	PCI PERR	PCI PERR occurred
Button		14h	00h	Power Button	Power switch has been activated
			01h	Sleep Button	Sleep switch has been activated
			02h	Reset Button	Reset switch has been activated
Module / Board		15h		CPU / Terminator Missing	CPU / Terminator is not mounted
					correctly
System Boot Initiated		1Dh	03h	User requested PXE boot	PXE (Network) Booted
			04h	Automatic boot to diagnostic	When the maintenance Utility
					Booted
Boot Error		1Eh	00h	No bootable media	Boot Media does not exist.
			02h	PXE Server not found	PXE Server is not found
			00h	C: boot completed	ESM Pro installed OS has been
					booted
			02h	PXE boot completed	PXE boot for the express server is
					finished (not supported)
			03h	Diagnostic boot completed	Maintenance Utility has been booted
					(not supported)

3-26