SECTION
SECTION 4—FOOTBOARD
ASSEMBLY
WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the off position.
DO NOT stand on the
Limited clearance between footboard and caster - The user’s feet MUST remain on the footboard while operating the chair. If the user’s feet are allowed to rest off the side of the footboard they may come in contact with the caster possibly resulting in injury.
Removing/Installing the Footboard Assembly
NOTE: For this procedure, refer to FIGURE 4.1.
Removing
1.Remove the two mounting bolts that mount the footboard assembly to the base frame.
2.Remove the footboard assembly from the base frame.
Installing
1.Align the footboard assembly with the adjustment holes in the base frame.
2.Install the footboard assembly using the two mounting bolts and locknuts.
Base Frame
Adjustment
Holes
Locknuts | Mounting | |
Bolt | ||
|
Mounting
Bolt
Footboard 
Assembly
FIGURE 4.1 Removing/Installing the
Footboard Assembly
Adjusting Footboard Assembly Height
NOTE: For this procedure, refer to FIGURE 4.1.
1.Remove the footboard assembly. Refer to Removing/Installing the Footboard Assembly on page 30.
2.Align the footboard assembly to one of three desired adjustment holes on the base frame.
3.Attach the footboard assembly to the base frame with two mounting bolts and locknuts. Securely tighten.
At’m and At’m QT | 30 | Part No. 1125078 |
