Invacare 1125078 service manual Replacing Seat Positioning Strap

SECTION 5—SEAT

Replacing Seat Positioning Strap

WARNING

ALWAYS wear your seat positioning strap.

The seat positioning strap is a positioning belt only. It is not designed for use as a safety device withstanding high stress loads such as auto or aircraft safety belts. If signs of wear appear, belt MUST be replaced IMMEDIATELY.

NOTE: For this procedure, refer to FIGURE 5.2.

1.Remove the locknut that secures one seat positioning half-strap to the wheelchair frame.

NOTE: DO NOT remove the mounting screw.

2.Slide the seat positioning half-strap away from the wheelchair frame.

3.Position one new seat positioning half-strap on the mounting screw.

4.Reinstall the locknut that secures the seat positioning half-strap to the wheelchair frame.

5.Repeat STEPS 1- 4 for the other half of the seat positioning strap.

One Seat Positioning
Half-Strap	One Seat Positioning
	Half-Strap

Wheelchair	Locknut
Frame

Mounting Screw

NOTE: DO NOT remove the mounting screw.

NOTE: Seat upholstery not shown for clarity.

FIGURE 5.2 Replacing Seat Positioning Strap

Part No. 1125078 33 At’m and At’m QT