SECTION 8—BATTERIES
Charger Plugged Into the Joystick
NOTE: For this procedure, refer to FIGURE 8.7.
NOTE: The charger port located on the front of the joystick requires the use of an independent charger. The independent charger is supplied with the wheelchair.
1.Attach the battery charger connector to the charger port on the front of the joystick.
2.Plug the charger’s AC power cord or extension into the grounded
3.When charging is complete, turn charger off.
4.Disconnect output cable from joystick charger port.
Multi-Function
Charger Port
FIGURE 8.7 Charging Using an
Independent Charger - Charger Plugged Into
the Joystick
Charger Plugged Directly to Batteries - At’m Only
NOTE: For this procedure, refer to FIGURE 8.8.
1.Disconnect the RED and BLACK connector from the wheelchair harness.
2.Connect 3-pin charger connector to the female 3-pin connector on the charger jumper cable (supplied).
3.Connect RED and BLACK connector on the charger jumper cable to the RED and BLACK connector on the battery pack.
4.Plug the charger’s AC power cord into the grounded 110-volt wall outlet.
5.When charging is complete, turn charger off.
6.Disconnect the charger jumper cable from the battery pack.
7.Reconnect the RED and BLACK connector from the battery pack to the wheelchair harness.
AC Power Cord | Plug into Wall Outlet |
|
Charger Jumper Cable
Independent
Charger
RED and | Battery | |
Pack | ||
BLACK Battery | ||
| ||
Connectors |
|
Female | |
| |
Connector | Connector |
|
FIGURE 8.8 Charging Using an Independent Charger - Charger Plugged Directly to Batteries
- At’m Only
Part No. 1125078 | 53 | At’m and At’m QT |
