SECTION
5.Mount the front seat tube to the seat frame with the two mounting bolts. Refer to Detail “A” of FIGURE 5.4.
6.Install the under seat basket. Refer to Removing/Installing
7.Install the arm tubes. Refer to Removing/Installing Arm Tube on page 39.
8.Install the seat. Refer to Removing/Installing the Seat on page 31.
Replacing the Seat Latches
NOTE: For this procedure, refer to FIGURE 5.5.
1.Remove the seat. Refer to Removing/Installing the Seat on page 31.
2.Turn the seat upside down.
3.Perform one of the following:
•For Rear Seat Latches - untie the release cord from the latch.
•For Front Seat Latches - remove the front seat release loop.
4.Remove mounting bolt and locknut that secures the latch to the seat frame.
NOTE: DO NOT remove the latch bolt.
5.Insert the new latch onto the frame.
6.Install the mounting bolt and locknut.
7.Perform one of the following:
•For Rear Seat Latches - insert the release cord through the hole in the latch and secure the cord to the latch.
•For Front Seat Latches - secure the front seat release loop to the latch with the one locknut.
8.Install the seat. Refer to Removing/Installing the Seat on page 31.
Latch | Latch Bolt | |
DO NOT Remove | ||
|
Locknut 
Mounting Bolt
Seat Frame
FIGURE 5.5 Replacing the Seat Latches
At’m and At’m QT | 36 | Part No. 1125078 |
