Page 42

Dual-Tap TM-4200GE AccuPiXEL Series Camera-Control Software

The Gamma.45 option is designed to cause the camera to gather light for a result very similar to what the human eye sees. The heavier curved blue line represents the Gamma.45 LUT adjustment.

FIGURE 46. Gamma.45 imitates human eye sensitivity when creating an image.

The knee setting allows two adjustments in the light gathering configuration of the LUT to permit the camera to correct images as they are captured. It is possible to set knees on any of the drop down settings by clicking on the existing curve and moving it to the desired configuration. If a drop-down menu setting is selected without adjusting the knees, the camera sets the default.

FIGURE 47. The setting does not activate until the Send Knees button is clicked.

6.5.5 (c) Knee Control

The Knee Control graphical control allows you to change two knee point values visually by clicking and dragging the “knee line.” You may also enter X1, Y1, X2, Y2 values directly to adjust the knee curve. When you have chosen the value you want and are ready to set this value to the camera, click the “Send Knees” button.

Introduction

Page 54
Image 54
JAI TMC-4200GE operation manual Dual-Tap TM-4200GE AccuPiXEL Series Camera-Control Software