JVC GY-HD100, GY-HD101 manual Using External Components, „ Connecting the IEEE1394 Cable

USING EXTERNAL COMPONENTS

Connecting the Video Signal Cables

Dubbing with AV Devices

USING EXTERNAL COMPONENTS

Clamp filter	IEEE1394 switch
	HDV	VIDEO/Y
	IEEE 1394
	DV
		PB
Wind once	OUTPUT	PR
	LINE
	DC INPUT	IEEE1394

Composite cable	IEEE 1394	VIDEO/Y
	HDV
	DV
		P B

„Connecting the IEEE1394 Cable

To reduce the emission of unwanted radio waves, be sure to attach the provided clamp filter as shown in the figure on the left.

•Attach the clamp filter as close to the camcorder as possi- ble, as shown in the figure.

•Set the IEEE1394 switch on the left panel of the cam- corder.

DV	: DV format
HDV	: HDV format

CAUTION

Connect the cables and set the switches with the power on the device OFF.

„Composite and Component Connections

The video signals output from the video signal output connec- tors on this camcorder (VIDEO/Y, PB, PR) are as described below, depending on the settings for the OUTPUT TERMI- NAL item on the VIDEO FORMAT menu screen.

AUTO	: Automatically switches to a composite or
	component signal, depending on which
	cable is connected to the video signal
	output terminal and outputs the signal.
COMPOSITE	: Outputs a composite signal regardless of

1.

Composite cable or Component cable

IEEE 1394	VIDEO/Y
	P
OUTPUT	P
DC INPUT LINE	IEEE1394

LINE OUTPUT connector

1.

Audio cable

Signal flow

Recording unit

Signal flow

By connecting the video signal output terminal and the LINE OUTPUT terminal on this camcorder to an AV device, analog signal dubbing is possible.

1.Connect the cables.

Use the provided cable for the audio cable.

To reduce the emission of unwanted radio waves, be sure to attach the provided clamp filter as shown in the figure on the left.

•Attach the clamp filter as close to the camcorder as possible, as shown in the figure.

2.Turn both devices on.

3.Set the camcorder to VTR mode.

Press the CAM/VTR button. The VTR indicator lights.

4.Set the video output.

Set the VIDEO FORMAT menu screen. X See page 62.

•HDV PB OUTPUT item:

Set the video format to be output from the video output terminal during tape playback.

• PB TAPE item:

Select whether to automatically detect the playback tape video format or play back only a particular format. Normally, use the “AUTO” setting.

• OUTPUT TERMINAL item:

Set either component or composite output.

Normally, use the “AUTO” setting.

OUTPUT	PR
LINE
DC INPUT	IEEE1394

Component cable

C H A N G E 1 3 9 4 S W I T C H

		which cable is connected to the video sig-
		nal output connector.
COMPONENT		: Outputs a component signal regardless
		of which cable is connected to the video
		signal output connector.
Output signal when AUTO is set
Connector (G: Unconnected F: Connected)				Output
				Signal
VIDEO/Y		PB	PR
F		F	F	COMPONENT
F		G	F	COMPOSITE
F		F	G	COMPONENT
F		G	G	COMPOSITE
	None of the above			OFF

In addition, you can use the PB TAPE item to set whether to automatically detect the video format of the playback tape or only play back a particular format when playing back a tape.

X See page 63.

CAUTION

Be careful not to apply excess force to the video signal out- put terminal when connecting or disconnecting the cable. This will cause poor contact or failure.

„Displaying Alarms

• CHANGE 1394 SWITCH

Displayed when the setting for the input/output video format from the IEEE1394 connector and the setting for the IEEE1394 switch are different.

Set the IEEE1394 switch so it matches the video format.

Clamp filter

4.

VIDEO FORMAT menu screen

5.

AUDIO menu screen

5.Set the audio output. X See page 53.

Set the AUDIO/MIC menu screen. X See page 70.

• AUDIO MONITOR item:

Set stereo audio or mixed audio.

• PB AUDIO CH [DV] item:

Set the audio channel to be output.

• Set the MONITOR SELECT switch.

6.Insert the videocassettes.

GY-HD100	: Insert the recorded videocassette.
Recording unit	: Insert the videocassette to be
	dubbed to.

7.Press the PLAY/STILL button on the GY-HD100 to start playback.

8.Start recording on the recording unit.

For details, see the instructions to the unit used for recording.

9.When dubbing is completed.

Stop recording on the recording unit, and then press the STOP button on the GY-HD100 to stop playback.

54 55