MENU SCREENS

OTHERS [2/2] Menu Screen

* This is not displayed in VTR mode.

Item

 

 

Function/Setting (bold characters indicate initial settings)

 

1394 REC TRIGGER*

Sets how to control the REC trigger command output from the IEEE1394 connector. (Can be displayed and set in

 

 

 

camera mode)

 

 

 

Set this when recording a backup of the DV signal from this camcorder onto another device.

 

 

 

OFF

: Does not control the backup device.

 

 

 

SYNCRO : Controls the backup device in conjunction with the recording start/stop mode status on the camcorder,

 

 

 

 

and if there is no videocassette or if no tape remains for recording, controls the backup device in con-

 

 

 

 

junction with the REC trigger button and the lens VTR button on the camcorder.

 

 

 

SPLIT

: The REC trigger button on the right panel of the camcorder controls the backup device recording start/

 

 

 

 

stop. Set this when you want to control the timing of the recording on the camcorder and the backup

 

 

 

 

device separately.

 

 

 

SERIES

: Automatically starts recording on a backup device that is on Pause when the tape on the camcorder has

 

 

 

 

less than 3 minutes remaining during shooting.

 

 

 

MEMO

 

 

 

 

• If you use the backup recording function on the BR-HD50, set this item to OFF.

 

 

 

• The cursor (K) does not move to this item when the camcorder is recording.

 

MENU ALL RESET

Selects whether to reset the menu screen settings to initial settings.

 

 

 

The camera mode and VTR mode menu settings are reset. (The TC PRESET, UB PRESET, and CLOCK ADJUST

 

 

 

settings are not reset.)

 

 

 

CANCEL : The settings are not reset.

 

 

 

EXECUTE : The settings are reset.

 

 

 

MEMO

 

 

 

 

• The cursor (K) does not move to this item when the camcorder is in VTR mode or is ejecting a tape.

 

 

 

• If the current menu settings and the factory settings have different FRAME RATE settings, “REBOOT!” is dis-

 

 

 

played for 3 seconds, the camcorder automatically turns off and then turns on.

 

PAGE BACK

When the cursor is in this position, press the SHUTTER dial once to return to the OTHERS [1/2] menu screen.

 

DRUM HOUR

Displays the drum usage time.

 

 

 

Use as an estimate for regular maintenance.

 

 

 

The cursor (K) does not move to this item.

 

FAN HOUR

 

Displays the fan motor usage time.

 

 

 

Use as an estimate for regular maintenance.

 

 

 

The cursor (K) does not move to this item.

 

MENU SCREENS

FILE MANAGE Menu Screen

 

 

 

 

 

 

You can perform the following operations in the FILE MAN-

 

 

 

 

 

 

AGE menu screen.

 

 

 

 

 

 

• Settings corresponding to shooting conditions can be read

 

 

 

 

 

 

 

immediately with the following read-only files.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LIVE HD30P: Ideal setting for HD30P format

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LIVE HD25P: Ideal setting for HD25P format

 

 

 

 

 

 

 

CINEMA HD24P: Ideal setting for movie film shooting

 

 

 

 

 

 

 

* The read-only files listed above cannot be saved or reset.

 

 

 

 

 

 

• Save menu settings (Camcorder: CAM1, CAM2; SD mem-

 

 

 

 

 

 

 

ory card: EXT1, 2, 3, 4) to files.

 

 

 

 

 

 

Load saved files.

 

FILE MANAGE menu screen

 

You can set a SUB NAME for the file to be saved.

 

 

 

 

 

 

• Reset the menu settings to the factory settings.

 

 

 

 

 

 

• Initialize (format) an SD memory card.

 

 

 

 

 

 

When you set CANCEL for the LOAD, STORE, RESET

 

 

 

 

 

 

 

and FORMAT SD CARD items, these operations are not

 

 

 

 

 

 

 

 

 

 

 

 

 

 

executed.

 

 

 

 

 

 

 

A message is displayed in the LCD monitor or the view-

 

 

 

 

 

 

 

finder.

 

 

 

 

 

 

 

 

Execute

: Displayed for 3 seconds

 

 

 

 

 

 

 

Complete

: Displayed for 3 seconds

 

 

 

 

 

 

 

Error

: Flashes (Error displays X See page 80.)

If there is an error:

• Press the STATUS button ο Return to the normal screen.

• Press the SHUTTER dial ο Return to the FILE MAN- AGE menu screen.

• To exit the FILE MANAGE screen:

Move the cursor (K) to PAGE BACK and press the SHUT- TER dial

or

press the STATUS button.

Execute

Complete

Flashing

Error display

Error

Reboot display

„Displaying the FILE MANAGE menu

screen

Select the FILE MANAGE.. item on the TOP MENU screen.

„Loading a menu settings file

Select the LOAD FILE.. item on the FILE MANAGE menu screen.

1.Turn the SHUTTER dial, bring the cursor (K) to SELECT and press the SHUTTER dial.

The file name setting area flashes.

2.Turn the SHUTTER dial, select the file to load and press the SHUTTER dial.

3.Turn the SHUTTER dial, bring the cursor (K) to the LOAD item and press the SHUTTER dial.

EXECUTE flashes.

4.With EXECUTE selected, press the SHUTTER dial to read the menu settings in the selected file.

If the current menu settings and the menu settings to be loaded have different video format settings, “REBOOT!” is displayed for 3 seconds, the camcorder turns off automat- ically and then turns on.

78

79

Page 42
Image 42
JVC GY-HD100, GY-HD101 manual Others 2/2 Menu Screen, File Manage Menu Screen, „ Displaying the File Manage menu Screen