JVC GY-HD100, GY-HD101 manual TIME/DATE Menu Screen, Others 1/2 Menu Screen

MENU SCREENS

TIME/DATE Menu Screen

Item		Function/Setting (bold characters indicate initial settings)
DISPLAY	Sets whether the date and time are shown in the status display on the LCD monitor or in the viewfinder.
	OFF	: Not displayed.
	ON	: Displayed.
	When a tape with time and date not recorded is played back, there will be no display of time and date even when
	this item is set to ON.
DISPLAY MODE	In the Camera mode, the date and time are displayed in accordance with the following settings.
	In the VTR mode, if the DATE REC item is set to OFF, the date and time recorded on a tape are displayed in accor-
	dance with the following settings.
	BARS+CAM	: Date and time are always displayed.
	BARS	: Date and time are displayed when the color bars are output.
	CAM	: Date and time are displayed when the camera images are output.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
DISPLAY STYLE	Selects the style for the date and time display.
	DATE+TIME	: Date and time are displayed.
	DATE	: Date only is displayed.
	TIME	: Time only is displayed.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
DATE STYLE	Selects the style for the date display.
	YY/MM/DD	: Displayed in the format of year/month/date.
	MM/DD/YY	: Displayed in the format of month/date/year.
	DD/MM/YY	: Displayed in the format of date/month/year.
	Variation Range: U model: MM/DD/YY E model: DD/MM/YY
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
TIME STYLE	Selects the style for the time display.
	24 HOUR	: Displays the time using the 24-hour system.
	12 HOUR	: Displays the time using the 12-hour system.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
SEC DISPLAY	Selects whether to display the seconds in the time display.
	ON	: Seconds are displayed.
	OFF	: Seconds are not displayed.
	When the DISPLAY item is set to OFF, “- - -” is indicated and this item cannot be selected.
TIME SHIFT	Sets the clock OFFSET time. (1H steps)
	Adds time to the built-in clock (time compensation) and displays it. The adjusted time is also recorded on the tape.
	[Settings: –23H - –1H, OFF, +H - +23H]
CLOCK ADJUST	To adjust the date and time, align the cursor with this position and then press the SHUTTER dial.
	The date and time are set on the CLOCK ADJUST screen.
	X See “Setting the Date and Time” on page 37.
PAGE BACK	The TC/UB/CLOCK menu returns when the SHUTTER dial is pressed while the cursor is at this position.

MENU SCREENS

OTHERS [1/2] Menu Screen

The OTHERS menu screen consists of two screens (1/2 screen, 2/2 screen)

Item		Function/Setting (bold characters indicate initial settings)
OUTPUT CHAR.	Selects whether to display the menu screen or the warning display on the monitor connected to the video signal out-
	put connector.
	ON	: On-screen-display
	OFF	: No on-screen-display
LONG PAUSE TIME	Selects the time (minutes) before the tape protect mode (drum head rotation stopped) is engaged when the record-
	standby condition continues.
	3MIN	: 3 minutes
	5MIN	: 5 minutes
	* When used in a cold environment or when the stopped or STILL status continues, the setting will be 3 minutes or
	less regardless of the setting on the menu.
	* Normally, set “3MIN” and use this to prevent head clogging and tape damage.
ALARM VR LEVEL	Selects whether or not alarm sound is emitted and the volume of the alarm sound.
	The alarm sound is output through the monitoring loudspeaker and the PHONES jack.
	OFF	: Sound is not output.
	LOW	: Alarm sound is soft.
	MIDDLE	: Alarm sound is normal.
	HIGH	: Alarm sound is loud.
FRONT TALLY	Selects the lighting method of the FRONT TALLY lamp during recording.
	BLINK	: The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
		steadily during recording.
	ON	: The lamp lights only during recording.
	OFF	: The lamp is always off.
BACK TALLY	Selects the lighting method of the BACK TALLY lamp during recording.
	BLINK	: The lamp blinks from when the REC/VTR trigger is pressed and until recording starts. The lamp lights
		steadily during recording.
	ON	: The lamp lights only during recording.
	OFF	: The lamp is always off.
FORMAT LED	Sets whether or not the [HDV/DV LED] h on page 15 lights for HDV format or DV format.
	ON	: Lights.
	OFF	: Does not light.
NEXT PAGE	To display the OTHERS [2/2] menu screen, move the cursor to this position and press the SHUTTER dial.
PAGE BACK	The TOP MENU screen returns when the SHUTTER dial is pressed while the cursor is at this position.

76 77