PREPARATIONS
Basic System
PREPARATIONS
Attaching the Zoom Lens (Provided)
SHOULDER BELT
EARPHONE
MICROPHONE
COMPONENT CABLE
RCA pin
COMPOSITE CABLE | MONITOR |
RCA pin |
|
|
AUDIO CABLE
| 1. Loosen the mount ring. |
| 2. Attach the lens with its pin aligned with the hole in the |
| mount. |
Pin | 3. Tighten the mount ring. |
Hole | 4. Connect the cable connector. |
| |
| 5. Clamp the lens cable. |
| CAUTION |
| • Be sure to tighten the mount ring completely. Incomplete |
| tightening may result in the lens dropping off or disturbed |
Clamp | back focus. |
• Set the | |
| zoom lens is attached or detached. |
FOCUS MANUAL UNIT
*1
Attaching the Microphone (Provided)
| MICROPHONE | |
1/3 ZOOM LENS | ||
Th13 × 3.5BRMU (FUJINON) | ||
|
Wide Converter |
|
|
|
1/3 ZOOM LENS |
| BATTERY | |
| Th16 × 5.5BRMU (FUJINON) | BATTERY | |
|
|
| |
FOCUS MANUAL UNIT |
|
|
|
*1 |
| DC cable (2m) | AC |
|
| ||
|
| AC ADAPTER |
|
|
|
| |
ZOOM SERVO UNIT | STANDARD PACKAGE |
|
|
|
|
| |
|
|
| DV VTR |
| Mount Converter |
|
|
1/2 ZOOM LENS |
|
| |
|
| ||
S14 × 7.3B12U (FUJINON) |
|
|
|
1. 3. Knob | 2. Microphone |
Microphone holder
5. Clamp
Connect the provided microphone to the microphone holder. Provided microphone is a phantom microphone.
1.Turn the knob on the microphone holder anticlockwise to loosen it and open the microphone holder.
2.Place the microphone in the microphone holder.
Place the microphone toward the front to prevent it from interfering with the cassette cover.
3.Turn the knob on the microphone holder clockwise to secure the microphone.
4.Connect the microphone cable to the INPUT1 or INPUT2 input connector on the
5.Attach the microphone cable to the clamp.
6.Make sure to perform the correct setting for use of a phan- tom microphone.
X See page 46.
S17 | × 6.6BRM (FUJINON) | IEEE1394 CABLE | |
S20 | × 6.4B12U (FUJINON) | CARRYING CASE |
|
YH16 × 7K12U (CANON) |
| ||
YH19 × 6.7K12U (CANON) | |||
|
| ||
|
| TRIPOD |
|
|
|
|
DOLLY
*1 An
For details, please consult your JVC authorized dealer.
4. INPUT1, 2 connector
How to Attach the Viewfinder
| To attach the viewfinder, slide it in the direction of the arrow. |
Knob | To take off the viewfinder, pull the knob in the direction of the |
| |
Taking off the viewfinder | arrow as you slide the viewfinder. |
28 | 29 |