ENGLISH
Headphones — KS-HP2
You can listen to the playback sounds with | Main elements and features | |||||||||||
cordless | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Installing the batteries |
| Left side | Right side | ||||||||
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Batteries (R03/AAA)
— supplied only for initial setup purpose
CAUTIONS:
•The supplied batteries are not rechargeable. DO NOT recharge them; otherwise, battery leakage or explosion may result.
•Insert the batteries with the correct polarity “+” and
Before using the cordless headphones:
The headphones give best results when used within about 2 m from the transmitter.
These headphones need to receive infrared (IR) signals sent from IR transmitters on the monitor. Therefore, if you use the headphones where the signals cannot be received in a straight line of sight, noises may be generated.
IR transmitters
POWER
VOL 
1IR sensors
• DO NOT cover the IR sensors, as
reception will become poor.
2ON/OFF button
•The power automatically shuts off in the following cases:
–The headphones are used for about 4 hours.
–No signal is received for about 4 minutes.
•You can turn on the power again by
pressing the button.
3POWER lamp
4 Volume control
Playback sounds are transmitted through IR transmitters to the cordless headphones. When using the headphones, set the monitor menu item “IR” to “ON.” (See page 14.)
WARNING:
DO NOT use the headphones while driving. Shutting out all outside sounds while driving is dangerous and may result in a traffic accident.
10
