JVC KV-MRD900 manual 48 kHz, 16 bits

ENGLISH

About sounds reproduced through the terminals

•Through the analog terminals (AV-OUT/cordless headphones): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 30.)

•Through DIGITAL OUT (optical):

Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see table below.)

To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set “DIGITAL AUDIO OUTPUT” correctly. (See page 30.)

Output signals through the DIGITAL OUT terminal

Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 30).

	DIGITAL AUDIO OUTPUT		Output Signals
Playback Disc		STREAM/PCM	DOLBY DIGITAL/PCM	PCM ONLY
DVD 48 kHz, 16/20/24 bits Linear PCM		48 kHz, 16 bits stereo Linear PCM
	96 kHz, Linear PCM
	with DTS	DTS bitstream	48 kHz, 16 bits stereo Linear PCM
	with Dolby Digital	Dolby Digital bitstream		48 kHz, 16 bits
				stereo Linear PCM
	with MPEG Audio	MPEG bitstream	48 kHz, 16 bits Linear PCM
Audio CD, Video CD		44.1 kHz, 16 bits stereo Linear PCM
Audio CD with DTS		DTS bitstream	44.1 kHz, 16 bits stereo Linear PCM
MP3/WMA		32/44.1/48 kHz, 16 bits Linear PCM

36