Item |
|
| Description | |
G ND Filter Position | Displays the current ND filter position. | |||
| No display | : [ND FILTER] is set to AOFFB | ||
| ND1/4 | : [ND FILTER] is set to A1/4B | ||
| ND1/16 | : [ND FILTER] is set to A1/16B | ||
| Memo: |
|
|
|
|
|
|
| |
●You can turn ON/OFF the display using [Filter] of [Status Display] in the [LCD/VF] menu. (A Page 90)
HRemaining Space on Displays the remaining recording time of the external device (0 to 999). When the remaining time is running out,
External Device | this is indicated in red (value + unit of measurement) as a warning to the user. | |
| Memo : |
|
|
| |
| ● Only warnings are displayed in the STATUS 0 and STATUS 4 screens. | |
IOperation of External Displays the operating status of the connected external device. For details, refer to the instruction manual of the
Device | corresponding external device. |
| |||
| Memo : |
|
|
| |
|
|
|
| ||
| ● Only warnings are displayed in the STATUS 0 and STATUS 4 screens. |
| |||
|
|
|
| ||
|
|
| |||
J Time Code (TC)/ | Displays the time code (hour : minute : second : frame) or user’s bit data. |
| |||
User’s Bit (UB) | Example : Time Code: | 0 0 : 0 0 : 0 0 : 0 0 |
| ||
|
|
|
|
| |
|
|
|
| Colon (:) for |
|
| Memo: |
| User’s Bit : | FF EE DD 20 Dot (.) for drop frames |
|
|
|
|
| ||
|
|
|
| ||
●You can turn ON/OFF the display using [TC/UB] of [Status Display] in the [LCD/VF] menu. (A Page 91)
●You can select whether to display the time code or user’s bit using the [TC DISPLAY] switch on the inner panel of the LCD monitor.
KSynchronization with This item is valid when [TCG Source] in the [TC/UB] menu is set to AExternalB.
External Time Code | Lights up | : When the |
| [TC IN] terminal. | |
Generator |
| |
Light goes out : When the signal is not synchronized, or when there is no time code input to the [TC IN] | ||
|
| terminal. |
105