JVC GY-HM790CHE, GY-HM790CHU, GY-HM790E, GY-HM790U, LST1108-001A 114

Status Screen in IEEE1394

Input Mode (continued)

Item	Description

AFrame Rate/Bit Rate Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p SP, 50i, 60i)

B Resolution

Displays the video image resolution. (19201080, 14401080, 1280720, 720480, 720576)

C Audio Level Meter

-20 dB

-10 dB

Displays the audio level for CH-1 and CH-2.

A

mark is displayed when the audio format is not supported in the IEEE1394

mode. (32k, 44.1k)

The positions of -20 dB and -10 dB are displayed as AoB.

Memo :

● You can turn ON/OFF the display using [Audio Meter] of [Status Display] in the

[LCD/VF] menu. (A Page 91)

D Voltage/Remaining

Displays the current status of the power supply in use.

Battery Power

Display

Description

12.3V

Currently powered by an AC adapter. The current voltage is shown on the right.

If the supplied voltage from the AC adapter is low, the voltage value will be

displayed in red as a warning.

12.3V

Currently powered by a battery.

When the battery power runs out, the battery mark appears hollow, and ARESB is

200min

displayed.

Memo:

30%

● The display on the right can be set using [Battery Info] of [Status Display] in the

RES

[LCD/VF] menu. (A Page 91)

Enlarged Status Display on

LCD Monitor

You can enlarge and display only the characters of the status screen on the LCD monitor.

A

CH1

CH2

B

DF

J

C

FREE

STBY STOP REC REVIEW

1280 x 720

STBY

A

DD

I

D

min 60p HQ

100min

B 123 min

OK

67.8min

E

F G

H

Item

Description

A Audio Level Meter

Displays the audio levels of [CH-1] and [CH-2].

If the reference audio level (A-20dBBor A-12dBB) is exceeded, this is displayed in yellow. The AOverB area is

displayed in red. A48kB is the sampling frequency.


	Memo:
	Memo:
	● When [Rec Mode] in the [Rec Mode] menu is set to AVariable FrameB, audio cannot be recorded and is
	indicated by the			mark.


B Framing Mode	Displays the framing mode.
	[DF]	: Drop frame
	[NDF]	: Non-drop frame

110

Contents

Page Introduction FOR USA IMPORTANT SAFEGUARDS FOR USA AND CANADA CAUTION POUR CANADA ATTENTION INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR CANADA) Page Page Introduction Preparations Shooting Playback Menu Display and Detailed Settings Status Screen Camera Features Connecting External Devices Others [GENLOCK INPUT], [TC IN], [TC OUT] Terminals and Return Video Function SD (Standard Definition) Recording Adoption of MPEG-2Long GOP for Easy Editing High Resolution via Triplex Offset Spot Meter Function Application Software Provided Storage and Usage Locations Transportation Power Saving Maintenance Batteries Regular Inspection (Maintenance) SDHC Cards Others Handling of SDHC Cards Characteristic CCD Phenomena Copyright Page Page N ML K J FGH aZ Y X W W Side Control Panel Viewfinder LCD Monitor FP G H I JK L M N O SD Slot Rear Zoom Lens Page Status Screen in Camera Mode (A Page 102) Status Screen (VF/LCD) During Clip Playback in Media Mode (SD Card Mode) Status Screen in Media Mode (IEEE1394 Mode) (A Page 109) Status Screen in USB Mode Enlarged Status Display on LCD Monitor Auto White Display (Camera Mode Only, Excluding AUX Mode) Alarm Display Menu Setting Screen Zebra Pattern Display Preparations Attaching the Zoom Lens Attaching the Microphone (Supplied) Attaching the Viewfinder (Supplied) Charging the Built-InBattery Recommended Batteries Battery Operating Time Precautions for the Battery Operation Attaching the Battery (GY-HM790CHU/GY-HM790U) Attaching the Battery (GY-HM790CHE/GY-HM790E) Detaching the Battery Warnings by Lamps and Alarm Tones Power Status Display Viewfinder and LCD Monitor Screens Precautions for Batteries Charging Turning On the Power Camera Mode (Except AUX Mode) AUX Mode (U model only) Media Mode (SD Card Mode) Media Mode (IEEE1394 Input Mode) Setting the Clock in the [Initial Setting] Screen Changing the Time after Initial Setting Setting the date/time (A Page 95) Changing the Display Style Setting the date style (Date Style) (A Page 91) Setting the time style (Time Style) (A Page 91) Date/Time Display in Different Operation Modes 3 4 2 7, 8 Adjusting the LCD Monitor Adjusting the Angle of the LCD Monitor Adjusting the LCD Monitor Screen Adjusting the Viewfinder Adjusting the Angle Adjusting the Visibility Adjusting the Viewfinder Screen When [LCD + VF] in the [LCD/VF] Menu is Set to AOnB (A Page 88) Displays on the LCD Monitor and Viewfinder Screens When [LCD + VF] in the [LCD/VF] Menu is Set to AOffB (A Page 88) SDHC Cards to Use Estimated Recordable Time of SDHC Cards Write-ProtectSwitch on the SDHC Card Inserting an SDHC Card Card Slot Status Indicator Removing the SDHC Card Switching SDHC cards Formatting (Initializing) SDHC Cards Restoring the SDHC Card Clips Recorded to SDHC Cards Folders in the SDHC Card Recording Clips Clip (Recorded Data) and Clip Name Recorded Clips Shooting Focus Assist Function Assigning Focus Assist function to the [RET] button on the lens List of Formats Selecting a System Definition Selecting a File Format Selecting a Video Format Selecting the Aspect Ratio of SD Videos Setting the Record Format Menu Manual Iris (Manual Adjustment) Mode Auto Iris (Automatic Adjustment) Mode Fixed Gain Mode (Manual Gain Switching) Automatic Gain Mode (Automatic Gain Adjustment) Fixed Shutter Mode (Manual Shutter Switching) Switching Shutter Mode Switching Shutter Speed Automatic Shutter Mode (Automatic Shutter Adjustment) Memory A Mode (A), Memory B Mode (B) Manual White Balance Mode (Manual Switching) Preset Mode (PRESET) White Paint Adjustment Automatic White Balance Mode (FAW: Fulltime Auto White balance) Page Page Adjusting Audio Recording Level Setting Audio Input Setting of [CH-2INPUT] Selection Switch Manual Adjustment Mode (Manual Adjustment) Automatic Adjustment Mode Audio Monitor During Recording Using Stereo Type Earphone Jack Displaying Time Code and User’s Bit Time Code Operation Mode Presetting the Time Code Required Settings Before Preset Presetting the Time Code (continued) Setting Time Code Presetting the User’s Bit Setting Time Code Without Opening the Menu Required Settings Before Preset (A Page 49) Setting User’s Bit Without Opening the Menu Setting User’s Bit Recording Time Code in Continuation of the Recorded Time Code on SDHC card Connection When connecting external time code generator to a master device Settings on the Camera Recorder Camera Recorder Operation Specify the brightness (luminance) level range for displaying zebra pattern When [Max&Min]/[Max]/[Min] is selected When [Manual] is selected Page Appending OK Marks During Recording Pre Rec Clip Continuous Rec Variable Frame Rec Number of Frames that can be Set Playback Thumbnail Screen No Detailed Properties (4x3 Thumbnails) Screen Operation Buttons Thumbnail Screen (continued) No Detailed Properties (4x3 Thumbnails) Screen (continued) Page Detailed Properties (4x1 Thumbnails) Screen Playing Back Time Code Playback Deleting One Clip During Thumbnail Screen Deleting with [Delete Clip] B [One Clip] in the menu During Playback or Pause Screen Deleting All Clips Appending OK Marks Deleting OK Marks Menu Display and Detailed Settings Display and Description of the Menu Screen Selecting Menu Items [Scene File]/[Picture File] (A Page 120) Changing Setting Values Text Input with Software Keyboard [Clip Name Prefix] (A Page 76) Page Page Page Record Format Menu Rec Mode Menu Clip Set Menu Audio Set Menu Page Switch Set Item Page FULL AUTO Item Page Page Detail/Adjust... Item White Balance Item Shading Mode/Adjust Item Color Matrix/Adjust Item Page Page Shooting Assist Item Marker Setting Item Status Display Item Page Page Page Page Page Genlock Adjust Item Page Adding Menu Items to Favorites Menu Editing Favorites Menu Deleting Items from [Favorites Menu] Editing Favorites Menu (continued) Changing the Order of Items in [Favorites Menu] Page Page Page Page Page Page STATUS 3 Screen STATUS 4 Screen STATUS 1 and STATUS 2 Screens Page Page Page Camera Features [Aspect Marker] Display [Aspect Marker] Display for Different [Aspect Ratio] Settings [Safety Zone] Display [Center Mark] Display Color Range Setting Function (Skin Adjust Function) Hue Range Detection Using the Skin Detail Function Checking the Preset Hue Area Setting Color Bar Output Using the USER Buttons Page Page Example Scene file: Picture file: Number of Storable Setup Files Preset Setup Files Compatibility Saving Setup Files Loading a Setup File Resetting Setup Files Connecting External Devices Connecting via SDI Connecting via Composite/Component Output Settings for Composite Output Settings for SDI Output [PHONES] Terminal Backup Recording Checking Videos Recorded on the External Device Status Screen Display in AUX Mode Status Screen Enlarged Status Display Screen Synchronizing Signal to Use Phase Items to Synchronize Adjusting the H Phase Page Studio System Connection Loading Clips to the PC (USB Connection Mode) Disconnecting Precautions for Using the Remote Control Unit List of Remote Control Unit Functions RM-LP25U RM-LP55U RM-LP57U Page Tally Lamps Alarm Tone Page Camera Section General Lens Section (GY-HM790U/GY-HM790Eonly) Storage Section Video/Audio Time Code Terminal Section Accessories Dimensional Outline Drawing (Unit: mm) GY-HM790CHU/GY-HM790U GY-HM790CHE/GY-HM790E HM790CHU/-HM790U/GY-GY HM790CHE-HM790E/GY-GY