Setting Gain |
| Setting the Electronic |
|
| Shutter |
|
|
|
This function electrically boosts the light sensitivity when there is insufficient illumination on the object. You can set the gain of the video amplifier according to the brightness of the object. Select the setting mode according to your shooting conditions.
[GAIN] Selection
Switch
[FULL AUTO] 
Switch
You can select the gain of the video amplifier using the [GAIN] switch on the camera recorder.
The default positions of the switch are as follows.
[L]: 0 dB (No electrical boosting.)
[M]: 9 dB (Boosts sensitivity by about 2.8 times. )
[H]: 18 dB (Boosts sensitivity by about 8 times. )
Memo :
●The gain value of each position can be set to AALCB and within the range of A0dBB to A18dBB (in increments of 3 dB) in the menu. Increasing the sensitivity causes the screen to appear grainier. (A Page 79)
Automatic Gain Mode (Automatic Gain Adjustment)Set the [FULL AUTO] switch on the camera recorder to AONB to enter Automatic gain Level Control (AALCB fixed). The gain of the video amplifier is automatically set according to the brightness of the object.
In this case, the [GAIN] switch on the camera recorder is disabled.
Memo :
●When [Gain] in the [Camera Function] B [FULL AUTO] menu is set to ASW SetB, you can switch the gain with the [GAIN] switch even if the [FULL AUTO] switch on the camera recorder is set to AONB. (A Page 81)
You can change the shutter speed (time for each shooting frame) using the electronic shutter function. Electronic shutter can be adjusted manually or automatically.
Fixed Shutter Mode (Manual Shutter Switching)Use the Set button (R) to switch between the shutter modes and the
[FULL AUTO] Switch
Set Button (R)
(JK)
Press the Set button (center of the
Memo :
●When the shutter is ON, AStepB, AVariableB, or AEEIB (Extended Electric Iris, i.e. Automatic Shutter mode) may be selected using [Shutter] in the [Camera Function] menu. AStepB is the factory default. (A Page 78)
40