3 Use the
Numbers between 0 and 9 or alphabets between A and F can be specified for the user’s bit.
Cursor
[UB Preset] Screen
Memo :
●Press the [USER2] button to reset each digit to A0B. The cursor moves to the left.
4 Check the values and press the Set button (R).
●The time code is set and the screen returns to [TC/UB].
●To cancel the setting, press the [CANCEL] button.
5 Press the [MENU] button.
Returns to the normal screen.
Setting Time Code Without Opening the Menu[USER1] Button
[USER2] Button
[MENU] Button
Set Button (R)
Cross-
shaped
button
(JKH I)
[CANCEL] Button
Memo :
●Settings cannot be made in the following cases.
●[TCG Source] in the [TC/UB] menu is set to AExternalB.
●[TC GENE.] switch is set to AREGENB.
●Menu screen is displayed.
●The camera recorder is not in the Camera mode. (Except AUX Mode)
Required Settings Before Preset (A Page 49)●Set [TCG Source] in the [TC/UB] menu to AInternalB.
●Set the [TC DISPLAY] switch to ATCB.
●Set the [TC GENE.] switch to settings other than
AREGENB.
Setting Time Code
1 Hold down the [MENU] button and press the [USER1] button.
The [TC Preset] setting screen appears.
Cursor
[TC Preset] Screen (During drop frame)
2 Set the time code (hour, minute, second, frame).
Use the
Memo :
●Press the [USER2] button to reset each digit to A0B. The cursor moves to the time digit (left).
3 Check the values and press the Set button (R).
●The time code is set and the screen returns to the normal screen.
●To cancel the setting, press the [CANCEL] button.
Note :
●Editing will be canceled and the screen will close under the following situations.
●The [TC DISPLAY] switch is selected during editing.
●The camera recorder is switched to the Media mode.
●When editing time code, operations of the [USER1], [USER2], [USER3] buttons that are set in the [Main Menu] B [Camera Function] B [Switch Set] menu are disabled. [USER2] functions as the number reset button. (A Page 79)
51