JVC Audio Set Menu

Audio Set Menu

Item	Setting Values		Function
Input1 Mic Ref.	-50dB	For setting the reference input level when the [AUDIO INPUT1] button is set to AMICB or
	-60dB	AMIC+48VB.
		-50dB	: Sets -50 dB as the reference value.
		-60dB	: Sets -60 dB as the reference value.
Input2 Mic Ref.	-50dB	For setting the reference input level when the [AUDIO INPUT2] button is set to AMICB or
	-60dB	AMIC+48VB.
		-50dB	: Sets -50 dB as the reference value.
		-60dB	: Sets -60 dB as the reference value.
Mic Wind Cut	Both	For selecting whether to cut the low frequencies of the audio input signals (low-cut) when
	Input2	the [AUDIO INPUT 1/2] button is set to AMICB or AMIC+48VB. Set this item to reduce wind
		noise from the microphone.
	Input1
		Both	: Enables low-cut on both the [INPUT1] and [INPUT2] terminals.
	Off
		Input2	: Enables low-cut on the audio of the [INPUT2] terminal only.
		Input1	: Enables low-cut on the audio of the [INPUT1] terminal only.
		Off	: Disables low-cut.
Audio Ref. Level	-12dB	For setting the audio reference level to be recorded to the SDHC card. (Applies to both
	-20dB	[CH1/CH2].)
		-20dB	: Outputs signals of the reference level when the meter is at -20 dBFS.
		-12dB	: Outputs signals of the reference level when the meter is at -12 dBFS.
Audio Limiter	On	For specifying whether to trigger the limiter when the [AUDIO SELECT CH-1/CH-2] switch
	Off	is set to AMANUALB.
		On	: Triggers the limiter when excessive audio signals are input, and compresses the
			recording level.
		Off	: Does not trigger limiter.
Test Tone	On	For specifying whether to output the audio test signals (1 kHz) during color bar output.
	Off	On	: Audio test signals are output.
		Off	: Audio test signals are not output.

77