JVC manual 98

Menu Display and Detailed Settings

Others Menu (continued)

* Default values are indicated in bold characters.

Item	Setting Values					Function
Tally System	Studio	For setting the display conditions of the camera recorder’s tally lamps (front/back).
	Ext	Studio		: Displays according to the TALLY IN/PREVIEW IN signals from an external device,
	Int				such as a Remote Control Unit.
		Ext		: Displays mainly the status of external devices.
		Int		: Displays mainly the status of the camera recorder.
Front Tally		For specifying the illumination settings of the camera recorder’s front tally lamp during
	On	recording.
	Blink	On		: Lights up only during recording.
	Off	Blink		: Blinks after the [REC] trigger button is pressed until recording starts, and lights up
					during recording.
		Off		: Turns off the tally lamp.
Back Tally		For specifying the illumination settings of the camera recorder’s back tally lamp during
	On	recording.
	Blink	On		: Lights up only during recording.
	Off	Blink		: Blinks after the [REC] trigger button is pressed until recording starts, and lights up
					during recording.
		Off		: Turns off the tally lamp.
1394 Rec Trigger	Ext	For setting the recording trigger for the external recording device connected to the
	Series	[IEEE1394] terminal.
		Ext				: Outputs recording trigger to the external system only. (Recording is not
	Split
						performed by the internal system.)
	Synchronize	Series				: Outputs recording trigger to enable consecutive recording by the internal
	Off					and external systems.
		Split				: Outputs separate recording triggers to the internal and external systems.
		Synchronize : Outputs recording trigger simultaneously to the internal and external
						systems.
		Off				: Recording trigger is not output to the external system.
		Memo:
		● This item is selectable only in Camera mode. It cannot be set when recording is in
			progress on the camera recorder or an external device.
		● When the external recording device connected to the [IEEE1394] terminal switches to the
			recording mode according to the settings, switching of operation mode using the
			[CAM/MEDIA] button and the Clip Review function will be disabled.
		● When [1394 Rec Trigger] is set to ASplitB, the [REC] button on the side of the camera
			recorder becomes a Rec Start/Stop button for the external device. (A Page 12)
		● When the [REC] button is pushed immediately after the power is turned on or after a
			menu setting is changed, recording with the external device might start about 10 seconds
			late.
1394 Auto Power	Enable	For setting whether to automatically turn off the power of the external recording device
Off	Disable	connected to the [IEEE1394] terminal when the [POWER] switch of the camera recorder is
		turned off.
		Enable : Turns off the power automatically.
		Disable : Disables this function.
		Memo :
			● The IEEE1394 control is only valid for external devices with a POWER OFF button.
Mode LED	On	For specifying the illumination settings of the operation mode indicator on the side control
	Off	panel of the camera recorder.
		On		: Lights up as below according to the operation mode. (A Page 8)
		Off		: Turns off the indicator.
						Operation Mode	Color
						Camera Mode	Blue/Purple
						Media Mode (SD Card Mode)	Green
						Media Mode (IEEE1394 Mode)	Orange
						USB Mode	Orange

94