7

Memo :

●If you do not want to save the file, select [Cancel] or press the [CANCEL] button to return to the previous screen.

●When saving of a file fails, a AStore Error!B message (indicated in red frame) appears for several seconds, after which the previous screen is displayed.

8 Saving is complete.

After saving of the file is complete, ACompleteB appears on the screen, and the menu screen closes automatically.

Loading a Setup File

1 Display the [Setup File Manage] menu.

Select the [Setup File Manage] menu on the [Main Menu] screen, and press the Set button (R). (A Page 97)

2 Select [Load File] and press the Set button (R).

3 Select [Scene File] or [Picture File], and press the Set button (R).

The existing files are displayed.

4 Select the file to load using the cross-shaped button (JK), and press the Set button (R).

Cursor

[Load File] Menu Screen

Memo :

●When the write-protect switch of the inserted SDHC card

is set, a mark appears beside the SDHC card icon. Setup files can be loaded from an SDHC card even if the write-protect switch is set.

●A mark is displayed at the right end when there are some settings that are not supported by the setup file (e.g., picture files saved using the GY-HM700 series). These files can be loaded by this camera recorder, but some of the settings will not be compatible. (A Page 119)

●Setup files that are completely incompatible will not be displayed. (A Page 119)

5 Select [Load] on the confirmation screen, and press

the Set button (R).

Loading starts, and ALoading...B appears on the screen.

5

Memo :

●If you do not want to load the file, select [Cancel] or press the [CANCEL] button to return to the previous screen.

●When loading of a file fails, a ALoad Error!B message (indicated in red frame) appears for several seconds, after which the previous screen is displayed.

6 Loading is complete.

After loading of the file is complete, ACompleteB appears on the screen, and the menu screen closes automatically.

Resetting Setup Files

1 Display the [Setup File Manage] menu.

Select the [Setup File Manage] menu on the [Main Menu] screen, and press the Set button (R). (A Page 97)

2 Select [Reset File] and press the Set button (R).

3 Select [Scene File] or [Picture File], and press the Set button (R).

The existing files are displayed.

4 Select the file to delete using the cross-shaped button (JK), and press the Set button (R).

Memo :

●Scene files and preset scene files stored inside the SDHC card cannot be selected or reset.

5 Select [Reset] on the confirmation screen, and press the Set button (R).

Deletion starts, and AResetting...B appears on the screen.

Memo :

●If you do not want to reset the file, select [Cancel] or press the [CANCEL] button to return to the previous screen.

6 Resetting is complete.

After resetting of the file is complete, ACompleteB appears on the screen, and the menu screen closes automatically.

121