●Do not remove the battery when the [POWER] switch is AONB.
●Do not insert or remove the DC cable when the battery is in use.
●Leaving the camera recorder unused with the battery inside will deplete the battery power even if you set the [POWER] switch to AOFFB. Remove the battery if you are not using the camera recorder.
Attaching the BatteryUse the Dionic90 (Anton Bauer) battery.
1 Align the battery guide pins (x3) with the battery, adapter, and guide hole, and insert straight.
Guide Hole (x3)
Guide Pins
Release Lever
Use the
1 Attach the battery
Face the terminal downward and attach the V mount of the battery onto the V mount attachment bracket of the camera recorder.
V Mount Attachment Bracket
V Mount
2 Press down the battery until it snaps into place.
Detaching the BatteryPress down the release lever and slide the battery upward to detach it from the camera recorder.
Release Button
LCD Screen Side | Battery |
|
|
| |
Memo : |
| Battery |
● If the guide pins are not inserted straight, the battery will |
| |
not be attached correctly. |
|
|
2 Slide the battery toward the SDHC card cover side |
|
panel until it snaps into place.
Detaching the Battery
Press down the release lever and slide the battery toward you to detach it from the camera recorder.
Release Lever
Battery
23