Error Display |
|
|
|
| |
Status Screen | Menu Screen | Status |
|
| Action |
Thumbnail Screen |
|
|
|
| |
|
|
|
|
| |
^ | Power of the camera recorder is |
| When making use of a connected external | ||
POWER ? |
| turned off while the external device |
| device, turn on the power supply on the | |
|
| connection is detected, and the same |
| connected device. | |
|
| connection cannot be detected |
|
|
|
|
| several seconds after power is turned |
|
|
|
|
| on again. (Error displays for about 7 |
|
|
|
|
| seconds) |
|
|
|
|
|
|
|
| |
VIDEO FORMAT | ^ | ● Video format of the file for Clip |
| Set [Camera Resolution] and | |
INCORRECT |
| Review is different from the |
| ||
|
| [Frame & Bit Rate] setting of the |
|
|
|
|
| camera recorder. |
|
|
|
|
| ● IEEE1394 input video format is |
|
|
|
|
| different from the |
|
|
|
|
| [Camera Resolution] and |
|
|
|
|
| [Frame & Bit Rate] settings. |
|
|
|
|
|
|
|
| |
|
| ● The video system of the camera |
| Set [System Definition] in the | |
|
| recorder is not compatible with the |
| [Record Format] menu according to the | |
|
| IEEE1394 input signal. |
| ||
|
|
|
|
| |
MEDIA FULL | ^ | ● [REC] button is pressed when the |
| Replace the SDHC card with a new one. | |
|
| media in use has no remaining |
|
|
|
|
| space. |
|
|
|
|
| ● Remaining space ran out during |
|
|
|
|
| recording. |
|
|
|
|
|
|
|
| |
FAN MAINTENANCE | ^ | ● Usage time of the fan has |
| Check the fan and replace accordingly. For | |
REQUIRED |
| exceeded 9000 hours. |
| more details, consult your nearest JVC | |
|
|
|
| dealer. | |
|
|
|
| Memo: |
|
|
|
|
|
| |
|
|
|
| ● You can check the usage time of the fan in the | |
|
|
|
| [Others] menu B [System Information] B | |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
The tally lamps start blinking when the remaining space on the SDHC card is running out during recording, or when the battery power is running low.
Blinking Mode | Remaining Battery Power/SDHC Card Space |
Blinks slowly | ● Battery power is low |
(once every second) | ● Remaining recording time on SDHC card is less than 3 minutes |
|
|
Blinks quickly | ● SDHC card is full |
(4 times a second) | ● Error on the camera recorder |
|
|
Alarm tone is output from the monitor speaker and [PHONES] terminal when the battery level is low.
Alarm tone is output from the monitor speaker and [PHONES] terminal when the SDHC card is full. (Camera mode only) Alarm tone is also output when an error occurs in the camera recorder.
Memo :
●[Alarm Level] in the [Others] menu can be used to specify whether alarm tone is to be output, as well as the volume level. (A Page 93)
●Alarm tone is not output during recording.
135