Using the Internal Time Code Generator (continued)

Presetting the Time Code (continued)Setting Time Code

[USER2] Button

[MENU] Button

Set Button (R)

Cross-

shaped button

(JKH I)

[CANCEL] Button

1 Select [Main Menu] B [TC/UB] B [TC Preset] and press the Set button (R). (A Page 88)

The [TC Preset] screen appears.

1

[TC/UB] Menu Screen

Memo :

●When the [TC GENE.] switch is set to AREGENB, the parameter is displayed as ARegenerationB and cannot be selected.

●When [Main Menu] B [TC/UB] B [TCG Source] is set to AExternalB, the parameter is displayed as AExternalB and cannot be selected.

2 Set the time code (hour, minute, second, frame).

Use the cross-shaped button (H I) to place the cursor at the item to set, then the cross-shaped button (JK) to change the values.

Cursor

During non-drop frame

[TC Preset] Screen (During drop frame)

Memo :

●Press the [USER2] button to reset each digit to A0B. The cursor moves to the time digit (left).

3 Check the values and press the Set button (R).

●The time code is set and the screen returns to [TC/UB].

●To cancel the setting, press the [CANCEL] button.

4 Press the [MENU] button.

Returns to the normal screen.

Presetting the User’s Bit

You can add an 8-digit hexadecimal number as the user’s bit to the recorded image.

[USER2] Button

[MENU] Button

Set Button (R)

Cross-

shaped button

(JKH I)

[CANCEL] Button

1 Set [Main Menu] B [TC/UB] B [TCG Source] to AInternalB. (A Page 88)

2 Select [Main Menu] B [TC/UB] B [UB Preset] and press the Set button (R). (A Page 88)

The [UB Preset] setting screen appears.

1

[TC/UB] Menu Screen

Memo :

●When the [TC GENE.] switch is set to AREGENB, the parameter is displayed as ARegenerationB and cannot be selected.

●When [Main Menu] B[TC/UB] B [TCG Source] is set to AExternalB, the parameter is displayed as AExternalB and cannot be selected.

50