JVC manual 96

Menu Display and Detailed Settings

A/V Out Menu

* Default values are indicated in bold characters.

Item	Setting Values			Function
Output Terminal	Composite		For setting output signals from the [Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on
	Component		the side of the camera recorder.
			Composite	: Outputs composite signals to the [Y/VIDEO] video signal output terminal.
	Off
			Component : Outputs component signals.
			Off	: Signals are not output.
Set Up	7.5% (U model)		For selecting whether to add a setup signal to the video signal output from the [Y/VIDEO]/[PB]/
	0.0% (E model)		[PR] video signal output terminal (BNC) on the side of the camera recorder.
			A setup signal can also be selected during signal input from the [IEEE1394] terminal.
		7.5%		: Adds setup signal.
		0.0%		: Setup signal is not added.
			Memo :
			● When [Frame & Bit Rate] is set to A50p (SP)B, A50p (HQ)B, A50i (SP)B, A50i (HQ)B, A25p
			(SP)B, or A25p (HQ)B, this item appears as A---Band cannot be selected. (A Page 75)
			● Depending on the menu settings of the camera recorder and the condition of the cable
			connected to it, the setup signal setting may be fixed at A0.0%B. A0.0%B is displayed in gray in
			this case.
HD/SD-SDI Out	HD-SDI		For specifying whether to output SDI signals from the [HD/SD-SDI] output terminal on the side of
	SD-SDI		the camera recorder.
			HD-SDI	: Outputs HD-SDI signals. Embedded (superimposed) audio signals and the time
	Off
				code are also output.
			SD-SDI	: Outputs SD-SDI signals down converted from HD. When [System Definition] in the
				[Record Format] menu is set to AHD (MPEG2)B (A Page 75), SD-SDI signals
				down converted from HD are output. Embedded (superimposed) audio signals and
				the time code are also output.
			Off	: SDI signals are not output.
			Memo :
			● When [System Definition] in the [Record Format] menu is set to ASD (DV)B, AHD-SDIBcannot
			be selected. Only SD-SDI signals are output. (A Page 75)
			● When DV signals are input from the [IEEE1394] terminal, AHD-SDIBcannot be selected.
			● User’s bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid
			video signals. Therefore, accurate values will not be output.
Down Convert	Side Cut		For setting the style of displaying down-converted images on a 4:3 aspect ratio screen. This
	Letter Box		setting applies to all Composite/SD-SDI/DV outputs.
			Side Cut	: Displays image with the left and right sides cut off.
	Squeeze
			Letter Box	: Displays as a wide image with the top and bottom blackened.
			Squeeze	: Displays image that is squeezed horizontally.
			Memo:
			● When [System Definition] in the [Record Format] menu is set to ASD (DV)B, this item appears
			as A---Band cannot be selected. (A Page 75)
Analog Out Char.	On		For selecting whether to display status and menu characters on the screen output from the
	Off		[Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on the side of the camera recorder.
			On	: Turns on display.
			Off	: Turns off display.
			Memo:
			● When [Analog Out Char.] is set to AOnB, the details shown on the viewfinder are also
			displayed in the image output from the video signal output terminal (BNC).
SDI Out Char.	On		For selecting whether to display status and menu characters on the screen output from the
	Off		[HD/SD-SDI] output terminal on the side of the camera recorder.
			On	: Turns on display.
			Off	: Turns off display.

92