Attaching Accessories
Attaching the Zoom Lens(Supplied with
Hole | 3 |
|
1 | Pin | |
|
|
2
Clamp 4
1 Loosen the mount ring.
2 Attach the zoom lens such that the pin matches the hole of the mounting area.
3 Tighten the mount ring.
4 Connect the cable connector.
5 Attach the lens cable to the clamp.
Memo :
●Tighten the mount ring completely. If it is not fully tightened, the lens may drop or the back focus may be out of alignment.
●When attaching or removing the zoom lens, set the [POWER] switch of the camera recorder to AOFFB.
Attaching the Microphone (Supplied)You can attach the supplied microphone to the microphone holder.
The supplied microphone has a phantom power supply.
Knob
Microphone
Microphone Holder
Clamp
[INPUT1/INPUT2] Terminal
Attaching the Viewfinder (Supplied)1 Slide the viewfinder in the direction of the arrow to attach it.
2 Turn the slide lock ring to secure the position of the viewfinder.
Slide Lock Ring
2
1
Viewfinder
3 Attach the viewfinder cable to the viewfinder terminal.
4 Pin the viewfinder cable to the clamp.
1 Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder.
2 Place the microphone in the microphone holder.
3 Turn the knob on the microphone holder clockwise to secure the microphone.
4 Connect the microphone cable to the [INPUT1] or [INPUT2] terminal.
5 Pin the microphone cable to the clamp.
6 Make sure to perform the correct settings for the phantom microphone (A Page 46).
4
3
Clamp
21