Setting the Clock

(Initial Setting)

Set the date/time of the built-in clock in the [Initial Setting] screen. The configured date/time data is saved in the built-in rechargeable battery even if the power is turned off.

Setting the Clock in the [Initial Setting] Screen

The [Initial Setting] screen appears when the power is turned on for the first time and when the built-in battery is turned on again after being fully discharged.

All operations are disabled until initial settings are complete.

[MENU] Button

Cross-Shaped

Button

(JKH I)

Set Button (R)

[POWER] Switch

1 Set the [POWER] switch to AONB.

The [Initial Setting] screen appears.

For GY-HM790CHU/GY-HM790U

For GY-HM790CHE/GY-HM790E

2 Specify [Time Zone] and [Date/Time].

AMove the cursor with the cross-shaped button (H I) and select the setting item.

BChange the values with the cross-shaped button (JK).

3 Press the Set button after setting is complete.

The clock is set to 0 seconds of the input date/time.

Memo :

●The configured date/time data can be displayed on the LCD monitor and viewfinder and be recorded to the SDHC card.

●The value of the year can be set in the range of A2000B to A2099B.

Changing the Time after Initial SettingSetting the date/time (A Page 95)

1 Select [Others] menu B [Date/Time].

The [Date/Time] setting screen appears.

2 Set the date and time.

AMove the cursor with the cross-shaped button (H I) and select the setting item.

BChange the values with the cross-shaped button (JK).

3 Press the Set button (R) after setting is complete.

The clock is set to 0 seconds of the input date/time.

26