SDHC Cards (continued)

Inserting an SDHC Card

This camera recorder comes with two card slots for video/ audio recording and playback (Slot A and B).

1 Slide the SDHC card cover knob of the desired slot in the direction of the arrow and open the cover.

2 Insert an SDHC card with the notched corner first.

3 Close the SDHC card cover.

1

 

 

Notched Corner

 

SDHC Card

3

2

 

Card Slot Status Indicator

The following table shows the respective states of slot A and B.

Lamp

Slot Status

Lights up in red

Inserted SDHC card is being accessed.

 

(writing/reading data)

 

Do not turn off the power of the camera

 

recorder or remove the SDHC card.

 

 

Lights up in green

On standby. Inserted SDHC card can be

 

used for recording or playback.

 

 

Light goes out

● SDHC card is not inserted.

 

● An unusable card is inserted.

 

● An SDHC card is inserted but a different

 

slot is selected.

 

 

Removing the SDHC Card

1 Check that the SDHC card to be removed is not being accessed (lights up in red).

2 Slide the SDHC card cover knob in the direction of the arrow and open the cover.

3 Push the SDHC card and remove it from the slot.

4 Close the SDHC card cover.

2 1

3

4

Memo :

●When both slots are inserted with usable SDHC cards, the previously selected slot is used.

Note :

●Data may be lost if you turn off the power of the camera recorder or remove the SDHC card when it is being accessed. All data recorded on the card, including the file that is being accessed, may be corrupted. Be sure to check whether the status indicator is lighted in green or not before you turn off the power or remove the SDHC card.

●If you mistakenly remove the card when it is being accessed, reinsert the card only after the status indicator goes off.

●The SDHC card may not be recognized if you insert and remove the card within a short time. When this happens, remove the card and wait for a few seconds before you reinsert.

Switching SDHC cards

When both card slots are inserted with SDHC cards, you can use the [SLOT SELECT] button to switch the card to use. When the memory on an SDHC card is full during recording, data recording automatically switches to the other card.

[SLOT SELECT] Button

Cross-Shaped

Button

(JKH I)

Set Button (R)

[CANCEL] Button

Note :

●The [SLOT SELECT] button is disabled during recording or playback. Cards will not be switched even if you press the button.

32