(Supplied with
CANON KT14 x 4.4KRSJ C B |
|
|
|
| A | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RET | W | T | A |
|
|
| M | IRIS | |
REC |
|
|
|
D E | F G HI J |
M
MANU. | SERVO |
ZOOM | |
K L M N O
AFocus Ring
BZoom Lever/Ring
To operate zoom with this lever, turn the [ZOOM] switch M and set it to AMANU.B.
CIris Ring
To operate auto iris, set the iris mode switch H to AAB.
DLens Cable
E[REC] Record Trigger Button
Starts/stops recording.
F[RET] Return Video Button
Press this button to play back and check the latest clip, according to the settings under [Clip Review] of [Switch Set] in the [Camera Function] menu. (A Page 79)
(A Page 56 [Viewing Recorded Videos Immediately (Clip Review)])
Memo :
●When [LENS RET] of [Switch Set...] in the [Camera Function] menu is set to AFocus AssistB, this button functions as the Focus Assist button. When it is set to AReturnB, a return video is displayed. (A Page 79)
GZoom Servo Control Lever
To operate zoom servo with the zoom servo control lever, set the [ZOOM] switch M to ASERVOB.
●Zooms into wide angle and increases the angle of view when AWB is pressed.
●Zooms into telephoto and decreases the angle of view when ATB is pressed.
●Zoom speed increases when the lever is pressed hard.
HIris Mode Switch
A: Auto iris operation mode. M : Manual iris operation mode.
IIris Momentary Button
Press and hold this button to change to auto iris mode when the iris mode switch H is set at AMB.
J[I.G.] Iris Speed Adjustment Knob
If the speed is set too fast, opening/closing of the iris becomes unstable and hunting may occur. Readjust the speed in this case.
KFilter
A transparent or UV filter for lens protection can be installed inside the lens hood from the front. Filters for various effects can also be used.
●Installable filter types
When installed on the hood | : | 82 mm P0.75 |
When installed on the lens body | : | 72 mm P0.75 |
LZoom Servo Connector
For connecting a zoom servo unit (sold separately).
M[ZOOM] Zoom Switch
SERVO : Enables zooming with the zoom servo control lever G.
MANU. : Enables zooming with the zoom lever/ring B.
NBack Focus Ring/Lock Screw
Exclusive ring for adjusting the back focus. After adjusting, secure with a lock screw.
(A Page 28 [Adjusting Back Focus])
O[M] Macro Focus Ring (for
Turn the ring in the direction of the arrow to take
Normal focusing and zooming cannot be performed in macro mode.
To take macro shots
●Set focus ring A to infinity (n).
●Set zoom ring B to the maximum wide angle.
●Rotate this ring in the direction of the arrow to adjust focus on the object.
Note :
●As the back focus knob is located nearby, be careful not to mistake the two knobs.
●Do not forget to restore the macro ring to its original position after use. (A Page 28 [Adjusting Back Focus])
16