JVC NX-CDR7 21

– 21 –

English

NORMAL

SPEED

d

B

RECLEVEL

321

CD

Good No good

Continued

Elapsed playing time

Playing Back the Entire Discs—Continuous

Play

You can play discs continuously.

1

Load discs into 3-CD Changer.

2

Select a disc, and start playback.

On the unit:

1 Press DISC repeatedly to select the disc you want.

2 Press CD 3 / 8.

On the remote control:

Press one of the disc number buttons (CD1, CD2,

and CD3).

CD playback starts from the first track of the selected

disc.

• Without selecting the disc number, pressing

CD3 / 8 starts playing back the currently selected

CD.

To stop playback for a moment, press CD 3 / 8.

To resume play, press CD 3 / 8 again.

To stop during play, press 7.

To remove the disc, press the corresponding open/close

buttons (0 CD1, 0 CD2, or 0 CD3) on the unit.

Disc playback sequence in 3-CD Changer

When 3 discs are loaded on the disc trays, they are played in one

of the following sequences.

• When CD 1 is pressed : CD 1 ] CD 2 ] CD 3 (then stops)

• When CD 2 is pressed : CD 2 ] CD 3 ] CD 1 (then stops)

• When CD 3 is pressed : CD 3 ] CD 1 ] CD 2 (then stops)

* If no disc is on the disc trays, 3-CD Changer skips such an

empty tray.

If the current disc is a CD Text

You can change the information in the main display. See “To show

the text information recorded on a CD Text” on page 25.

Track No.

Disc No.

The built-in 3-CD Changer can play back only finalized

CD-Rs/CD-RWs. If you play back unfinalized CDs,

“UNFINALIZE” appears in the main display.

Loading Discs

On the unit ONLY:

1

Press one of the open/close buttons (0 CD1, 0 CD2,

and0 CD3) for the disc tray you want to load a CD

onto.

The unit automatically turns on and the selected disc

tray comes out.

• If the sliding panel is left open, it moves up

automatically before the disc tray comes out.

2

Place a disc correctly on the

circle of the disc tray, with

its label side up.

• When using a CD single (8 cm), place it on the

inner circle of the disc tray.

3

Press the same open/close button (0 CD1, 0 CD2,

or0 CD3) you have pressed in step 1.

The disc tray closes.

When loading more than one disc continuously

Press the open/close button (0 CD1, 0 CD2, or 0 CD3) for the

next tray you want to place a disc onto. The first disc tray

automatically closes and the next disc tray comes out.

Contents

Main INSTRUCTIONS MANUEL DINSTRUCTIONS NX-CDR7 SP-NXCDR7 CA-NXCDR7 SP-NXCDR7 VOLUME 3CD R Warnings, Cautions and Others Mises en garde, prcautions et indications diverses G-1 For U.S.A. For Canada/pour le Canada G-2 Franais 1 Contents Recording on a CD-R/CD-RW.................... 28 Other Convenient CDR Functions.............. 39 Using the Timers........................................... 44 Introduction .................................................... 2 Introduction About This Manual Installation Power sources Moisture condensation 3 Precautions on Disc Playback and Recording Playback Recording 4 Location of the Buttons and Controls Remote Control Remote Control 5 Main Unit 6 Main Unit 89 CDR CD 7 Display Window 89 CDR CD Getting Started Unpacking Connecting Antennas FM antenna 1 9 1 2 3 To connect an outdoor AM antenna 10 Connecting Other Components To connect an analog component such as a cassette deck To remove the speaker grilles 11 To connect digital components 12 Putting the Batteries into the Remote Control 2 1 3 Basic and Common Operations CD CDR 10 +10 VOLUME BASS SOUND 14 Turning On the Power Saving the Power Consumption while On Standby Selecting the Sources and Starting Play To adjust the input level through the LINE IN jacks 15 Adjusting the Volume Changing the Display Information Reinforcing the Bass Sound Source indications Clock 16 Selecting the Sound Modes Creating Your Own Sound Modes MANUAL Modes To use your own sound mode D.CLUB FLAT Listening to FM and AM Broadcasts SET 10 +10 10 +10 VOLUME 18 Tuning into a Station To change the FM reception mode Presetting Stations 19 Tuning into a Preset Station 20 Playing Back Discs on 3-CD Changer CANCEL CD 7 NX-CD 21 Playing Back the Entire DiscsContinuous Play Loading Discs 22 Basic Disc Operations To exchange a disc during playback of another disc To start playing a disc during playback of another disc To locate a particular point in a track during play 23 To check the program contents To modify the program Playing at RandomRandom Play 24 CD1 PLAY ? CD2 PLAY ? CD3 PLAY ? Repeating Tracks or DiscsRepeat Play Other Convenient Functions To select the Continuous Play mode for 3-CD Changer 25 To show the text information recorded on a CD Text To adjust the playback speed To prohibit disc ejectionDisc Lock 26 Playing Back a Disc on CD Recorder 3CD 10 +10 REPEAT 10 +10 27 Playing Back a DiscNormal Play Basic Disc Operations To locate a particular point in a track during play To go to another track Recording on a CD-R/CD-RW REPEAT PITCH A.P.off DIRECT REC 29 Before You Start Recording Optimum Power Control (OPC) Sampling frequency rate converter Auto track-marking 30 High-Speed Recording Available recording modesREC MODE Finalization 31 Recording Any Sound Source Standard Recording To fade in and fade out the recording 32 To make a silent portion in your recording & (see below) To change the display information while recording 33 Recording from 3-CD Changer CD Synchronized Recording CD Direct Recording Using the DIRECT REC button 34 Using the REC MODE button CD REC & FINALIZE?=SET=LISTENING & FINALIZE? = CD REC?=1st Tr. REC? =SET=LISTENING?= Canceled=(back to the beginning) 35 First Track Recording Using the REC MODE button ONLY 36 Listening Edit Recording Using the REC MODE button ONLY 37 Recording the External Components Sound Synchronized Recording 38 Finalizing a DiscCD-R/CD-RW Recording a Single Track during Play 39 Other Convenient CDR Functions MENU 10 +10 VOLUME You cannot use the buttons and controls on the unit. Use only the remote control. 40 Recording Track Marks Manually Manual Track-Marking 41 Turning On or Off Sampling Frequency Rate Converter Separating Recorded Tracks AutomaticallyAuto-Track Space 42 Erasing Tracks (Only for CD-RW) Recording Skip Marks onto a CD-R/CD-RW 43 Unfinalizing a Disc (Only for CD-RW) Erasing All Tracks (Only for CD-RW) 44 Using the Timers 10 +10 VOLUME You cannot use the buttons and controls on the unit. Use only the remote control. STANDBY/ON 45 Setting the Clock To adjust the clock again Using Recording Timer How Recording Timer actually works 46 To turn on or off Recording Timer after its setting is done 47 Using Daily Timer AM How Daily Timer actually works CD CDR LINE FM 48 To turn on or off Daily Timer after its setting is done 49 Using Sleep Timer 120 How Sleep Timer actually works To sleep with the Sleep Timer and wake up with the Daily Timer Maintenance General Notes To handling discs To clean the disc To play new discs Glossary OPC (Optimum Power Control) PCA (Power Calibration Area) PMA (Program Memory Area) Sampling Frequency Messages 53 Troubleshooting 54 Specifications AmplifierCA-NXCDR7 Tuner CD player CD Recorder