JVC NX-CDR7 48

– 48 –

English

7

If you have selected “CD” as the source in the above

step, select a disc number.

Press¡ / ¢ or 4 / 1 to select the disc number

(CD 1, CD 2, or CD 3), then press SET.

IMPORTANT: When selecting a disc number, make

sure that a disc is already loaded on the selected disc

number tray. If there is no disc on the tray, playback

will not start.

If you have selected “FM” or “AM” as the source in

the above step, select a preset station.

Press¡ / ¢ or 4 / 1 to select a preset station,

then press SET.

8

Press ¡ / ¢ or 4 / 1 to adjust the volume

level, then press SET.

The DAILY (Daily Timer) indicator stops flashing and

remains lit.

9

Press to turn off the unit (on standby) if you

have set the timer with the unit turned on.

IMPORTANT: If you turn off the unit within 4

minutes before the timer on-time, Daily Timer

playback will not start.

If the unit is kept turned on when the timer on-time

comes

Daily Timer does not work at all.

If you change the source or press CLOCK/TIMER

or SLEEP while Daily Timer playback is being

performed

Daily Timer is canceled and the unit does not turn off

automatically.

• When you set Sleep Timer by pressing SLEEP, the unit turns off

as you set by Sleep Timer.

To turn on or off Daily Timer after its setting is done

1 Press CLOCK/TIMER repeatedly until “DAILY”

appears in the main display.

* “AM 12:00” is the initial setting time at the factory.

2 To turn off the Daily Timer, press CANCEL to select

“DAILY OFF.”

The (Timer) and DAILY (Daily Timer) indicators go

off from the display.

The Daily Timer is canceled, but the setting for the Daily

Timer remains in memory.

To turn on the Daily Timer, press SET.

The (Timer) and DAILY (Daily Timer) indicators

light on the display. The settings you have done are

shown in the main display for your confirmation.

DAILY

CD

DAILY

CD

REC= ON AM 12:00 = DAILY = ON AM 12:00 =

AM 12:00 =Canceled=(back to the beginning)

Contents

Main INSTRUCTIONS MANUEL DINSTRUCTIONS NX-CDR7 SP-NXCDR7 CA-NXCDR7 SP-NXCDR7 VOLUME 3CD R Warnings, Cautions and Others Mises en garde, prcautions et indications diverses G-1 For U.S.A. For Canada/pour le Canada G-2 Franais 1 Contents Recording on a CD-R/CD-RW.................... 28 Other Convenient CDR Functions.............. 39 Using the Timers........................................... 44 Introduction .................................................... 2 Introduction About This Manual Installation Power sources Moisture condensation 3 Precautions on Disc Playback and Recording Playback Recording 4 Location of the Buttons and Controls Remote Control Remote Control 5 Main Unit 6 Main Unit 89 CDR CD 7 Display Window 89 CDR CD Getting Started Unpacking Connecting Antennas FM antenna 1 9 1 2 3 To connect an outdoor AM antenna 10 Connecting Other Components To connect an analog component such as a cassette deck To remove the speaker grilles 11 To connect digital components 12 Putting the Batteries into the Remote Control 2 1 3 Basic and Common Operations CD CDR 10 +10 VOLUME BASS SOUND 14 Turning On the Power Saving the Power Consumption while On Standby Selecting the Sources and Starting Play To adjust the input level through the LINE IN jacks 15 Adjusting the Volume Changing the Display Information Reinforcing the Bass Sound Source indications Clock 16 Selecting the Sound Modes Creating Your Own Sound Modes MANUAL Modes To use your own sound mode D.CLUB FLAT Listening to FM and AM Broadcasts SET 10 +10 10 +10 VOLUME 18 Tuning into a Station To change the FM reception mode Presetting Stations 19 Tuning into a Preset Station 20 Playing Back Discs on 3-CD Changer CANCEL CD 7 NX-CD 21 Playing Back the Entire DiscsContinuous Play Loading Discs 22 Basic Disc Operations To exchange a disc during playback of another disc To start playing a disc during playback of another disc To locate a particular point in a track during play 23 To check the program contents To modify the program Playing at RandomRandom Play 24 CD1 PLAY ? CD2 PLAY ? CD3 PLAY ? Repeating Tracks or DiscsRepeat Play Other Convenient Functions To select the Continuous Play mode for 3-CD Changer 25 To show the text information recorded on a CD Text To adjust the playback speed To prohibit disc ejectionDisc Lock 26 Playing Back a Disc on CD Recorder 3CD 10 +10 REPEAT 10 +10 27 Playing Back a DiscNormal Play Basic Disc Operations To locate a particular point in a track during play To go to another track Recording on a CD-R/CD-RW REPEAT PITCH A.P.off DIRECT REC 29 Before You Start Recording Optimum Power Control (OPC) Sampling frequency rate converter Auto track-marking 30 High-Speed Recording Available recording modesREC MODE Finalization 31 Recording Any Sound Source Standard Recording To fade in and fade out the recording 32 To make a silent portion in your recording & (see below) To change the display information while recording 33 Recording from 3-CD Changer CD Synchronized Recording CD Direct Recording Using the DIRECT REC button 34 Using the REC MODE button CD REC & FINALIZE?=SET=LISTENING & FINALIZE? = CD REC?=1st Tr. REC? =SET=LISTENING?= Canceled=(back to the beginning) 35 First Track Recording Using the REC MODE button ONLY 36 Listening Edit Recording Using the REC MODE button ONLY 37 Recording the External Components Sound Synchronized Recording 38 Finalizing a DiscCD-R/CD-RW Recording a Single Track during Play 39 Other Convenient CDR Functions MENU 10 +10 VOLUME You cannot use the buttons and controls on the unit. Use only the remote control. 40 Recording Track Marks Manually Manual Track-Marking 41 Turning On or Off Sampling Frequency Rate Converter Separating Recorded Tracks AutomaticallyAuto-Track Space 42 Erasing Tracks (Only for CD-RW) Recording Skip Marks onto a CD-R/CD-RW 43 Unfinalizing a Disc (Only for CD-RW) Erasing All Tracks (Only for CD-RW) 44 Using the Timers 10 +10 VOLUME You cannot use the buttons and controls on the unit. Use only the remote control. STANDBY/ON 45 Setting the Clock To adjust the clock again Using Recording Timer How Recording Timer actually works 46 To turn on or off Recording Timer after its setting is done 47 Using Daily Timer AM How Daily Timer actually works CD CDR LINE FM 48 To turn on or off Daily Timer after its setting is done 49 Using Sleep Timer 120 How Sleep Timer actually works To sleep with the Sleep Timer and wake up with the Daily Timer Maintenance General Notes To handling discs To clean the disc To play new discs Glossary OPC (Optimum Power Control) PCA (Power Calibration Area) PMA (Program Memory Area) Sampling Frequency Messages 53 Troubleshooting 54 Specifications AmplifierCA-NXCDR7 Tuner CD player CD Recorder