JVC NX-CDR7 32

– 32 –

English

To make a silent portion in your recording

You can record a 4-second silence when using Standard

Recording. This is convenient when recording tracks from

many discs.

• This function can be used both for digital and analog

recording.

To make a silent portion in your recording, press REC

MUTE on the unit while recording.

Recording enters recording pause mode after recording a 4-

second silence. (You can also make a silent portion as long

as you want by holding the button.)

To resume recording, press CDR 3 / 8. (A track mark is

recorded when you resume recording.)

To change the display information while recording

You can change the information in the main display.

• For display information during playback, see “Changing

the Display Information” on page 15.

On the remote control ONLY:

Press DISPLAY repeatedly.

• Each time you press the button, the information in the

main display changes as follows:

■When the source is 3-CD Changer:

• During Standard Recording

• During CD Synchronized Recording (see page 33)

* When the current playback source is a CD Text, CD Text

information will be shown. See “To show the text

information recorded on a CD Text” on page 25.

■When the source is other than 3-CD Changer:

CDR track number

Playback source

indication

Remaining time

in CD-R/CD-RW

Clock

To adjust the recording input level

You can adjust the recording input level.

Once adjustment is made, it is memorized, and will be

recalled when you record any source on CD Recorder,

using any recording method (except when high speed

recording is selected).

While adjusting the recording input level, the sounds

through the speakers and headphones also change so that

you can check the difference by your own ears.

On the unit ONLY:

1 While CD Recorder is in recording pause mode, press

REC LEVEL (inside the sliding panel).

Now the VOLUME control (and VOLUME +/– on the

remote) works to adjust the recording level.

2 Turn the VOLUME control while listening to the

playback sound.

• Adjust the recording input level so that the OVER

indicator never lights.

• You can adjust the recording input level within the

range of +12 dB to –12 dB in 2 dB intervals.

Normally set it to 0 dB (initial setting at factory).

3 Press REC LEVEL again to finish the adjustment.

Now the VOLUME control (and VOLUME +/– on the

remote) works as usual to adjust the volume level.

4 Press 7 to cancel recording pause mode.

• If you press CDR 3 / 8, standard recording (see page

31) will start.

When you unplug the AC power cord or if a power

failure occurs

Input level adjustment will be erased in a few days. If this happens,

adjust the input level again.

Recording input level is also shown here

UNFINALIZE DISC

AUTO TRACK

RECLEVEL

321

ANALOG

REC

CDR

UNFINALIZE DISC

AUTO TRACK

RECLEVEL

321

ANALOG

REC

CDR

Playback source

indication

Remaining time

of the playing track Remaining time

in CD-R/CD-RW

Clock

(see below)

CD track number

& CDR track number