Automatic Buttonhole (Continued)
(_ Guide slot
(_)Guide block
Buttonhole guide plate
('_ Buttonhole template
® Catch
(_)Setting mark
F_Gear
(_)Base plate
(_ Lever
Select abuttonhole template @. Pull back the guide plate
catch (_, and slide the template into the guide plate (_ to
get the desired buttonhole. Release the catch to lock the
template into place. Insert the gear_of the base plate into
the template guide slot (_so that the guide btock(_ fits into
the center of the guide slot.
®
(_ Needle thread
Bobbin thread
F_Buttonhole foot
(_ Gear
® slot® Starting point
Attach the buttonhole foot (_), Adjust the position ofthe
gear(_, so itis aligned with the starting point of the
template(_, The lever can be used to change gear
positions, Pull the bobbin thread upthrough the guide slot
ofthe buttonhole guide plate by turning the handwheel
counterclockwise while holding the needle thread° Place
the bobbin and needle threads to the left side ofthe guide
plate_ Leave 3" to 4" (7.0 to 10.0 cm) of thread,
J
,J
94