Changing Needle
(_ Needleclampscrew
(_)Needleclamp
[_Turnoffthepowerswitch..
Raisetheneedletoitshighestpositionbyturningthe
handwheelcounterclockwise,towardyou,andlowering
thepresserfoot Loosentheneedleclampscrew(_by
turningitcounterclockwise.Removetheneedlefromthe
needleclamp_,
[] Inserta newneedleintotheneedleclamp(_withthe
flatsidetotherear.Wheninsertingtheneedleintothe
needleclamp(_, pushitupasfarasit goes.Tighten
theneedleclampscrew(_ firmlybyturningit clockwise,
[_To seeiftheneedleisgood,placetheflatsideofthe
needleontosomethingflat(needleplate,glass,etc.),
Thegapbetweentheneedleandtheflatsurfaceshould
beconsistent,.Neverusea bentorbluntneedle.
Adamagedneedlecancausepermanentsnagsorruns
inknits,finesilksandsilk-likefabrics.
To Remove and Attach the Foot Holder
(_ Thumb screw
(_) Foot holder
(_ Presser bar
• To remove
Remove the thumb screw(_by turning it counterclockwise
with a screwdriver,
oTo attach
Match the hole in the foot holder (_)with the threaded
hole in the presser bar (_ Fit the thumb screw(_into
the hole,. Tighten the screw(_by turning it clockwise with
ascrewdriver,
Changing Presser Foot
(_) Snap-on button (red button)
(_) Groove
(_ Pin
oTo remove
Raise the needle to its highest position by turning the
handwheel counterclockwise. Raise the presser foot, and
press the red button (_on the back of the foot holder,
•To attach
Place the selected presser foot, so that the pin(_) on the
foot lies just under thegroove(_)on the foot holder, Lower
the presser bar to lock the foot into place.
[]
f
%,,¸¸
f
Flat side
Lade piano ....._
Meplal vers r_
[]
Needle
Aguja
Aiguilte
[]
,J
.$12