![](/images/new-backgrounds/1093531/935319x1.webp)
3. OPERATION
3-1. Explanation Of Each Function
1. Function
(1)When the appliance is plugged in, it is set to 37 °F for the refrigerator and 0 °F for the freezer.
You can adjust the refrigerator and the freezer control temperature by pressing the ADJUST button.
(2)When the power is initially applied or restored after a power failure, maintains its previously set temperature.
Refrigerator | Ultra lce | |
Filter Reset | ||
|
.
2 How to Toggle the Display between °F and °C
(1)The initial setting is °F and the display temperature mode can be changed from °F to °ΔC or °ΔC to °ΔF by pressing and holding the FRZ TEMP and the REF TEMP keys at the same time for over 5 seconds.
3. Lock function (dispenser and display button lock)
(1)When the refrigerator is first turned on, the buttons are not locked. The display panel shows the padlock unlocked icon.
(2)To lock the display, the dispenser, and the control panel, press and hold the LOCK button for 3 seconds. The locked pad lock icon is displayed.
(3)The LOCK button is the only control feature that remains active in the locked state. The buzzer sound, other control buttons, and the dispenser are deactivated.
(4)To release from the locked state, press and hold the LOCK button again for 3 seconds.
Press & Hold | Press & Hold |
Ex) In selecting | Ex) In selecting |
"LOCK" | "LOCK" again |
4. Filter condition display function
(1) There is a replacement indicator icon for the filter cartridge on the dispenser.
(2)The water filter should be replaced approximately every six months.
(3)The water filter icon will turn on every six months to remind you to replace.
(4)After replacing the filter, press and hold the lock button more than 3 seconds.
This will turn off the reminder icon and reset the timer.
Classification | In initial Power On | Replace indicator | |
/ Filter RESET | light on | ||
| |||
Filter Status |
|
| |
|
| ||
Display |
|
| |
| Press & Hold | Press & Hold | |
|
|
|
- 5 -