3-2. Ice Maker Function
1.Operation Principle of icemaker
Power On
Start Position
Icemaking |
Mode |
Harvest |
Mode |
Park Position |
Fill |
Test Mode
•Adjusts EJECTOR to Start Position with power on.
•Waits until water becomes ICE after starting the icemaking operation.
•Runs MOTOR to drop ice from the tray into the ICE BIN. (During harvest mode, check if the ice bin is full.)
•Reaches Start Position
•Performs Ice Making Mode after supplying water by operating the SOLENOID in ICE VALVE.
•To operate LINE and SERVICE, press and hold the Cube Size button for 3 seconds. The icemaker will run through 3 stages:
Harvest
Fill
Icemaking.
(1)Turning the Icemaker stop switch off (O) stops the ice making function.
(2)Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.
|
| EJECTOR | |
|
| Automatic | |
Cube Size | Cube Size | Shut off Arm | |
Indicator Light | Power | ||
Selection Button | Switch | ||
|
- 9 -
